Gecko [ cardrly.com ]

/ usr / bin / [ HOME SHELL ]

Name	Size	Permission
2to3	106 B	-rwxr-xr-x
2to3-3.6	106 B	-rwxr-xr-x
CSPUpdate	3.53 MB	-rwxr-xr-x
CSPUpdateFallback	3.53 MB	-rwxr-xr-x
GET	15.84 KB	-rwxr-xr-x
HEAD	15.84 KB	-rwxr-xr-x
Mail	408.89 KB	-rwxr-xr-x
POST	15.84 KB	-rwxr-xr-x
[	53.6 KB	-rwxr-xr-x
ab	72.63 KB	-rwxr-xr-x
aclocal	35.62 KB	-rwxr-xr-x
aclocal-1.16	35.62 KB	-rwxr-xr-x
acyclic	12.41 KB	-rwxr-xr-x
addr2line	33.42 KB	-rwxr-xr-x
alias	29 B	-rwxr-xr-x
animate	11.88 KB	-rwxr-xr-x
appstream-compose	33.21 KB	-rwxr-xr-x
appstream-util	114.34 KB	-rwxr-xr-x
apropos	54.04 KB	-rwxr-xr-x
ar	61.96 KB	-rwxr-xr-x
arch	37.34 KB	-rwxr-xr-x
aria_chk	5.38 MB	-rwxr-xr-x
aria_dump_log	5.18 MB	-rwxr-xr-x
aria_ftdump	5.19 MB	-rwxr-xr-x
aria_pack	5.22 MB	-rwxr-xr-x
aria_read_log	5.33 MB	-rwxr-xr-x
arpaname	11.82 KB	-rwxr-xr-x
as	889.91 KB	-rwxr-xr-x
aspell	159.5 KB	-rwxr-xr-x
at	57.33 KB	-rwxr-xr-x
atq	57.33 KB	-rwxr-xr-x
atrm	57.33 KB	-rwxr-xr-x
audit2allow	14.85 KB	-rwxr-xr-x
audit2why	14.85 KB	-rwxr-xr-x
aulast	20.58 KB	-rwxr-xr-x
aulastlog	12.44 KB	-rwxr-xr-x
ausyscall	12.27 KB	-rwxr-xr-x
authselect	41.13 KB	-rwxr-xr-x
autoconf	14.42 KB	-rwxr-xr-x
autoheader	8.33 KB	-rwxr-xr-x
autom4te	31.43 KB	-rwxr-xr-x
automake	251.9 KB	-rwxr-xr-x
automake-1.16	251.9 KB	-rwxr-xr-x
autopoint	25.95 KB	-rwxr-xr-x
autoreconf	20.57 KB	-rwxr-xr-x
autoscan	16.72 KB	-rwxr-xr-x
autoupdate	33.08 KB	-rwxr-xr-x
auvirt	32.73 KB	-rwxr-xr-x
awk	669.77 KB	-rwxr-xr-x
b2sum	57.69 KB	-rwxr-xr-x
base32	41.47 KB	-rwxr-xr-x
base64	41.48 KB	-rwxr-xr-x
basename	37.41 KB	-rwxr-xr-x
bash	1.1 MB	-rwxr-xr-x
bashbug	7.18 KB	-rwxr-xr-x
bashbug-64	7.18 KB	-rwxr-xr-x
batch	137 B	-rwxr-xr-x
bc	94.98 KB	-rwxr-xr-x
bcomps	20.62 KB	-rwxr-xr-x
bdftopcf	45.4 KB	-rwxr-xr-x
bg	26 B	-rwxr-xr-x
bind9-config	3.33 KB	-rwxr-xr-x
bison	437.72 KB	-rwxr-xr-x
bond2team	22.74 KB	-rwxr-xr-x
bootctl	45.15 KB	-rwxr-xr-x
brotli	739.2 KB	-rwxr-xr-x
bunzip2	36.86 KB	-rwxr-xr-x
busctl	77.27 KB	-rwxr-xr-x
bwrap	69.63 KB	-rwxr-xr-x
bzcat	36.86 KB	-rwxr-xr-x
bzcmp	2.08 KB	-rwxr-xr-x
bzdiff	2.08 KB	-rwxr-xr-x
bzegrep	1.64 KB	-rwxr-xr-x
bzfgrep	1.64 KB	-rwxr-xr-x
bzgrep	1.64 KB	-rwxr-xr-x
bzip2	36.86 KB	-rwxr-xr-x
bzip2recover	16.44 KB	-rwxr-xr-x
bzless	1.23 KB	-rwxr-xr-x
bzmore	1.23 KB	-rwxr-xr-x
c++	1.21 MB	-rwxr-xr-x
c++filt	28.89 KB	-rwxr-xr-x
c89	224 B	-rwxr-xr-x
c99	215 B	-rwxr-xr-x
ca-legacy	1.61 KB	-rwxr-xr-x
cairo-sphinx	69.71 KB	-rwxr-xr-x
cal	65.98 KB	-rwxr-xr-x
captoinfo	85.31 KB	-rwxr-xr-x
cat	37.46 KB	-rwxr-xr-x
catchsegv	3.21 KB	-rwxr-xr-x
catman	41.45 KB	-rwxr-xr-x
cc	1.21 MB	-rwxr-xr-x
ccomps	24.72 KB	-rwxr-xr-x
cd	26 B	-rwxr-xr-x
centrino-decode	11.27 KB	-rwxr-xr-x
certutil	199.15 KB	-rwxr-xr-x
chacl	16.36 KB	-rwxr-xr-x
chage	77.68 KB	-rwxr-xr-x
chardetect	400 B	-rwxr-xr-x
chattr	16.41 KB	-rwxr-xr-x
chcat	13.57 KB	-rwxr-xr-x
chcon	70.34 KB	-rwxr-xr-x
checkipv2	2.75 MB	-rwxr-xr-x
checkmodule	427.01 KB	-rwxr-xr-x
checkpolicy	488.64 KB	-rwxr-xr-x
checkstatus	3.56 MB	-rwxr-xr-x
chfn	32.9 KB	-rwx--x--x
chgrp	66.29 KB	-rwxr-xr-x
chmem	45.47 KB	-rwxr-xr-x
chmod	62.2 KB	-rwxr-xr-x
chown	70.29 KB	-rwxr-xr-x
chronyc	127.6 KB	-rwxr-xr-x
chrt	37.19 KB	-rwxr-xr-x
chsh	24.72 KB	-rwx--x--x
chvt	12.53 KB	-rwxr-xr-x
cifsiostat	41.35 KB	-rwxr-xr-x
circo	12.26 KB	-rwxr-xr-x
cksum	37.39 KB	-rwxr-xr-x
clear	12.54 KB	-rwxr-xr-x
cloud-id	402 B	-rwxr-xr-x
cloud-init	406 B	-rwxr-xr-x
cloud-init-per	2.06 KB	-rwxr-xr-x
cluster	518.33 KB	-rwxr-xr-x
cmp	103.76 KB	-rwxr-xr-x
cmsutil	122.46 KB	-rwxr-xr-x
cockpit-bridge	500.39 KB	-rwxr-xr-x
col	29.01 KB	-rwxr-xr-x
colcrt	16.48 KB	-rwxr-xr-x
colrm	24.88 KB	-rwxr-xr-x
column	49.47 KB	-rwxr-xr-x
comm	41.56 KB	-rwxr-xr-x
command	31 B	-rwxr-xr-x
compare	11.89 KB	-rwxr-xr-x
compile_et	1.31 KB	-rwxr-xr-x
composite	11.88 KB	-rwxr-xr-x
config_data	6.97 KB	-rwxr-xr-x
conjure	11.88 KB	-rwxr-xr-x
convert	11.88 KB	-rwxr-xr-x
coredumpctl	44.91 KB	-rwxr-xr-x
corelist	14.64 KB	-rwxr-xr-x
cp	147.98 KB	-rwxr-xr-x
cpan	8.17 KB	-rwxr-xr-x
cpan-mirrors	4.19 KB	-rwxr-xr-x
cpapi1	3.33 MB	-rwxr-xr-x
cpapi2	3.33 MB	-rwxr-xr-x
cpapi3	3.33 MB	-rwxr-xr-x
cpio	159.8 KB	-rwxr-xr-x
cpp	1.21 MB	-rwxr-xr-x
cpupower	66.91 KB	-rwxr-xr-x
crb	2.58 KB	-rwxr--r--
crc32	1.02 KB	-rwxr-xr-x
crlutil	134.95 KB	-rwxr-xr-x
cronnext	49.8 KB	-rwxr-xr-x
crontab	61.67 KB	-rwsr-xr-x
cspdaemon	3.65 MB	-rwxr-xr-x
cspfwd	3.98 MB	-rwxr-xr-x
csplit	53.68 KB	-rwxr-xr-x
csslint-0.6	24.56 KB	-rwxr-xr-x
curl	230.08 KB	-rwxr-xr-x
cut	49.52 KB	-rwxr-xr-x
cvtsudoers	284.21 KB	-rwxr-xr-x
cxpm	29.11 KB	-rwxr-xr-x
date	105.96 KB	-rwxr-xr-x
db_archive	12.45 KB	-rwxr-xr-x
db_checkpoint	16.48 KB	-rwxr-xr-x
db_deadlock	16.48 KB	-rwxr-xr-x
db_dump	16.51 KB	-rwxr-xr-x
db_dump185	69.55 KB	-rwxr-xr-x
db_hotbackup	20.49 KB	-rwxr-xr-x
db_load	28.61 KB	-rwxr-xr-x
db_log_verify	16.52 KB	-rwxr-xr-x
db_printlog	33.4 KB	-rwxr-xr-x
db_recover	16.51 KB	-rwxr-xr-x
db_replicate	16.49 KB	-rwxr-xr-x
db_stat	16.48 KB	-rwxr-xr-x
db_tuner	24.55 KB	-rwxr-xr-x
db_upgrade	12.45 KB	-rwxr-xr-x
db_verify	16.46 KB	-rwxr-xr-x
dbilogstrip	1.35 KB	-rwxr-xr-x
dbiprof	6.06 KB	-rwxr-xr-x
dbus-binding-tool	110.43 KB	-rwxr-xr-x
dbus-cleanup-sockets	16.39 KB	-rwxr-xr-x
dbus-daemon	239.7 KB	-rwxr-xr-x
dbus-monitor	28.58 KB	-rwxr-xr-x
dbus-run-session	15.88 KB	-rwxr-xr-x
dbus-send	28.54 KB	-rwxr-xr-x
dbus-test-tool	24.6 KB	-rwxr-xr-x
dbus-update-activation-environ...	16.41 KB	-rwxr-xr-x
dbus-uuidgen	12.38 KB	-rwxr-xr-x
dbxtool	28.73 KB	-rwxr-xr-x
dc	53.02 KB	-rwxr-xr-x
dd	77.97 KB	-rwxr-xr-x
deallocvt	12.54 KB	-rwxr-xr-x
debuginfo-install	3.62 KB	-rwxr-xr-x
debuginfod-find	16.47 KB	-rwxr-xr-x
delv	42.46 KB	-rwxr-xr-x
df	91.09 KB	-rwxr-xr-x
dfu-tool	121.79 KB	-rwxr-xr-x
diff	268.01 KB	-rwxr-xr-x
diff3	128.6 KB	-rwxr-xr-x
diffimg	12.27 KB	-rwxr-xr-x
dig	162.18 KB	-rwxr-xr-x
dijkstra	16.71 KB	-rwxr-xr-x
dir	139.9 KB	-rwxr-xr-x
dircolors	49.55 KB	-rwxr-xr-x
dirmngr	579.89 KB	-rwxr-xr-x
dirmngr-client	120.12 KB	-rwxr-xr-x
dirname	33.36 KB	-rwxr-xr-x
display	11.88 KB	-rwxr-xr-x
dltest	11.87 KB	-rwxr-xr-x
dmesg	77.88 KB	-rwxr-xr-x
dnf	2.05 KB	-rwxr-xr-x
dnf-3	2.05 KB	-rwxr-xr-x
dnsdomainname	21.16 KB	-rwxr-xr-x
dnstap-read	20.43 KB	-rwxr-xr-x
domainname	21.16 KB	-rwxr-xr-x
dot	12.26 KB	-rwxr-xr-x
dot2gxl	41.3 KB	-rwxr-xr-x
dotty	2.04 KB	-rwxr-xr-x
doveadm	946.91 KB	-rwxr-xr-x
doveconf	383.93 KB	-rwxr-xr-x
dovecot-sysreport	5.81 KB	-rwxr-xr-x
dpkg	316.17 KB	-rwxr-xr-x
dpkg-deb	165.5 KB	-rwxr-xr-x
dpkg-divert	157.75 KB	-rwxr-xr-x
dpkg-maintscript-helper	20.67 KB	-rwxr-xr-x
dpkg-query	165.84 KB	-rwxr-xr-x
dpkg-realpath	4.05 KB	-rwxr-xr-x
dpkg-split	132.39 KB	-rwxr-xr-x
dpkg-statoverride	66.41 KB	-rwxr-xr-x
dpkg-trigger	87.66 KB	-rwxr-xr-x
dracut	67.56 KB	-rwxr-xr-x
dtrace	17.39 KB	-rwxr-xr-x
du	107 KB	-rwxr-xr-x
dumpkeys	169.88 KB	-rwxr-xr-x
dumpsexp	16.43 KB	-rwxr-xr-x
dwp	2.13 MB	-rwxr-xr-x
dwz	167.64 KB	-rwxr-xr-x
ea-php82	7.77 MB	-rwxr-xr-x
ea-php82-pear	383 B	-rwxr-xr-x
ea-php82-pecl	299 B	-rwxr-xr-x
ea-php83	7.8 MB	-rwxr-xr-x
ea-php83-pear	383 B	-rwxr-xr-x
ea-php83-pecl	299 B	-rwxr-xr-x
ea-wappspector	100 B	-rwxr-xr-x
easy_install-3	246 B	-rwxr-xr-x
easy_install-3.6	246 B	-rwxr-xr-x
echo	37.35 KB	-rwxr-xr-x
edgepaint	420.79 KB	-rwxr-xr-x
egrep	28 B	-rwxr-xr-x
eject	57.78 KB	-rwxr-xr-x
elfedit	33.28 KB	-rwxr-xr-x
enc2xs	40.97 KB	-rwxr-xr-x
encguess	2.91 KB	-rwxr-xr-x
env	41.35 KB	-rwxr-xr-x
envml	4.1 KB	-rwxr-xr-x
envsubst	48.99 KB	-rwxr-xr-x
eps2eps	639 B	-rwxr-xr-x
eqn	232.16 KB	-rwxr-xr-x
event_rpcgen.py	54.26 KB	-rwxr-xr-x
evmctl	62.54 KB	-rwxr-xr-x
ex	1.13 MB	-rwxr-xr-x
expand	41.59 KB	-rwxr-xr-x
expr	49.57 KB	-rwxr-xr-x
factor	85.97 KB	-rwxr-xr-x
fallocate	28.96 KB	-rwxr-xr-x
false	33.32 KB	-rwxr-xr-x
fc	26 B	-rwxr-xr-x
fc-cache	132 B	-rwxr-xr-x
fc-cache-64	20.35 KB	-rwxr-xr-x
fc-cat	16.35 KB	-rwxr-xr-x
fc-conflist	12.25 KB	-rwxr-xr-x
fc-list	12.25 KB	-rwxr-xr-x
fc-match	16.26 KB	-rwxr-xr-x
fc-pattern	12.26 KB	-rwxr-xr-x
fc-query	12.24 KB	-rwxr-xr-x
fc-scan	12.26 KB	-rwxr-xr-x
fc-validate	16.26 KB	-rwxr-xr-x
fdp	12.26 KB	-rwxr-xr-x
fg	26 B	-rwxr-xr-x
fgconsole	12.55 KB	-rwxr-xr-x
fgrep	28 B	-rwxr-xr-x
filan	94.72 KB	-rwxr-xr-x
file	24.69 KB	-rwxr-xr-x
fincore	33.04 KB	-rwxr-xr-x
find	223.27 KB	-rwxr-xr-x
find-repos-of-install	3.62 KB	-rwxr-xr-x
findmnt	70.61 KB	-rwxr-xr-x
fips-finish-install	1.29 KB	-rwxr-xr-x
fips-mode-setup	3.91 KB	-rwxr-xr-x
flex	428.45 KB	-rwxr-xr-x
flex++	428.45 KB	-rwxr-xr-x
flock	33.2 KB	-rwxr-xr-x
fmt	45.49 KB	-rwxr-xr-x
fold	41.42 KB	-rwxr-xr-x
fonttosfnt	41.18 KB	-rwxr-xr-x
free	20.79 KB	-rwxr-xr-x
freetype-config	4.31 KB	-rwxr-xr-x
fribidi	21.14 KB	-rwxr-xr-x
ftp	101.2 KB	-rwxr-xr-x
funzip	36.63 KB	-rwxr-xr-x
fwupdagent	226.92 KB	-rwxr-xr-x
fwupdate	101.66 KB	-rwxr-xr-x
fwupdmgr	226.92 KB	-rwxr-xr-x
fwupdtool	478.34 KB	-rwxr-xr-x
g++	1.21 MB	-rwxr-xr-x
g13	211.98 KB	-rwxr-xr-x
galera_new_cluster	932 B	-rwxr-xr-x
galera_recovery	3.29 KB	-rwxr-xr-x
gapplication	20.45 KB	-rwxr-xr-x
garb-systemd	1.31 KB	-rwxr-xr-x
garbd	1.65 MB	-rwxr-xr-x
gawk	669.77 KB	-rwxr-xr-x
gc	16.64 KB	-rwxr-xr-x
gcc	1.21 MB	-rwxr-xr-x
gcc-ar	36.66 KB	-rwxr-xr-x
gcc-nm	36.66 KB	-rwxr-xr-x
gcc-ranlib	36.66 KB	-rwxr-xr-x
gcov	1.31 MB	-rwxr-xr-x
gcov-dump	570.96 KB	-rwxr-xr-x
gcov-tool	607.77 KB	-rwxr-xr-x
gdbm_dump	21.05 KB	-rwxr-xr-x
gdbm_load	25.31 KB	-rwxr-xr-x
gdbmtool	111.57 KB	-rwxr-xr-x
gdbus	48.72 KB	-rwxr-xr-x
gdk-pixbuf-query-loaders-64	15.93 KB	-rwxr-xr-x
gdk-pixbuf-thumbnailer	20.45 KB	-rwxr-xr-x
gdlib-config	2.79 KB	-rwxr-xr-x
gencat	24.84 KB	-rwxr-xr-x
genl-ctrl-list	12.04 KB	-rwxr-xr-x
geqn	232.16 KB	-rwxr-xr-x
getconf	32.46 KB	-rwxr-xr-x
getent	33.13 KB	-rwxr-xr-x
getfacl	25.38 KB	-rwxr-xr-x
getkeycodes	12.54 KB	-rwxr-xr-x
getopt	20.53 KB	-rwxr-xr-x
getopts	31 B	-rwxr-xr-x
gettext	48.97 KB	-rwxr-xr-x
gettext.sh	4.52 KB	-rwxr-xr-x
gettextize	42.69 KB	-rwxr-xr-x
ghostscript	12.35 KB	-rwxr-xr-x
gio	85.22 KB	-rwxr-xr-x
gio-querymodules-64	16.3 KB	-rwxr-xr-x
git	26.38 MB	-rwxr-xr-x
git-receive-pack	26.38 MB	-rwxr-xr-x
git-shell	15.79 MB	-rwxr-xr-x
git-upload-archive	26.38 MB	-rwxr-xr-x
git-upload-pack	26.38 MB	-rwxr-xr-x
glib-compile-schemas	48.85 KB	-rwxr-xr-x
gmake	235.32 KB	-rwxr-xr-x
gml2gv	41.23 KB	-rwxr-xr-x
gneqn	908 B	-rwxr-xr-x
gnroff	3.23 KB	-rwxr-xr-x
gpasswd	82.17 KB	-rwsr-xr-x
gpg	1.04 MB	-rwxr-xr-x
gpg-agent	419.3 KB	-rwxr-xr-x
gpg-connect-agent	165.3 KB	-rwxr-xr-x
gpg-error	34.16 KB	-rwxr-xr-x
gpg-error-config	2.26 KB	-rwxr-xr-x
gpg-wks-server	206.71 KB	-rwxr-xr-x
gpg-zip	3.44 KB	-rwxr-xr-x
gpg2	1.04 MB	-rwxr-xr-x
gpgconf	176.1 KB	-rwxr-xr-x
gpgme-json	85.68 KB	-rwxr-xr-x
gpgparsemail	28.74 KB	-rwxr-xr-x
gpgrt-config	2.26 KB	-rwxr-xr-x
gpgsm	514.46 KB	-rwxr-xr-x
gpgsplit	87.02 KB	-rwxr-xr-x
gpgv	451.51 KB	-rwxr-xr-x
gpgv2	451.51 KB	-rwxr-xr-x
gpic	293.84 KB	-rwxr-xr-x
gpio-event-mon	14.96 KB	-rwxr-xr-x
gpio-hammer	14.96 KB	-rwxr-xr-x
gprof	103.35 KB	-rwxr-xr-x
gr2fonttest	29.95 KB	-rwxr-xr-x
graphml2gv	20.65 KB	-rwxr-xr-x
grep	193.63 KB	-rwxr-xr-x
groff	124.92 KB	-rwxr-xr-x
grops	191.14 KB	-rwxr-xr-x
grotty	141.9 KB	-rwxr-xr-x
groups	37.39 KB	-rwxr-xr-x
growpart	29.19 KB	-rwxr-xr-x
grub2-editenv	448.09 KB	-rwxr-xr-x
grub2-file	928.53 KB	-rwxr-xr-x
grub2-fstest	1.15 MB	-rwxr-xr-x
grub2-glue-efi	279.41 KB	-rwxr-xr-x
grub2-kbdcomp	1.63 KB	-rwxr-xr-x
grub2-menulst2cfg	262.65 KB	-rwxr-xr-x
grub2-mkfont	312.12 KB	-rwxr-xr-x
grub2-mkimage	431.41 KB	-rwxr-xr-x
grub2-mklayout	289.48 KB	-rwxr-xr-x
grub2-mknetdir	485.75 KB	-rwxr-xr-x
grub2-mkpasswd-pbkdf2	291.88 KB	-rwxr-xr-x
grub2-mkrelpath	279.27 KB	-rwxr-xr-x
grub2-mkrescue	1.12 MB	-rwxr-xr-x
grub2-mkstandalone	594.31 KB	-rwxr-xr-x
grub2-render-label	937.13 KB	-rwxr-xr-x
grub2-script-check	316 KB	-rwxr-xr-x
grub2-syslinux2cfg	861.61 KB	-rwxr-xr-x
gs	12.35 KB	-rwxr-xr-x
gsettings	28.61 KB	-rwxr-xr-x
gsnd	277 B	-rwxr-xr-x
gsoelim	42.55 KB	-rwxr-xr-x
gss-client	24.56 KB	-rwxr-xr-x
gtar	448.99 KB	-rwxr-xr-x
gtbl	154.61 KB	-rwxr-xr-x
gtk-query-immodules-2.0-64	16.29 KB	-rwxr-xr-x
gtk-update-icon-cache	33.03 KB	-rwxr-xr-x
gtroff	805.02 KB	-rwxr-xr-x
gunzip	2.29 KB	-rwxr-xr-x
gv2gml	24.7 KB	-rwxr-xr-x
gv2gxl	41.3 KB	-rwxr-xr-x
gvcolor	46.9 KB	-rwxr-xr-x
gvgen	24.8 KB	-rwxr-xr-x
gvmap	526.31 KB	-rwxr-xr-x
gvmap.sh	2.14 KB	-rwxr-xr-x
gvpack	460.59 KB	-rwxr-xr-x
gvpr	7.83 KB	-rwxr-xr-x
gxl2dot	41.3 KB	-rwxr-xr-x
gxl2gv	41.3 KB	-rwxr-xr-x
gzexe	6.23 KB	-rwxr-xr-x
gzip	94.67 KB	-rwxr-xr-x
h2ph	28.69 KB	-rwxr-xr-x
h2xs	59.44 KB	-rwxr-xr-x
hash	28 B	-rwxr-xr-x
head	45.5 KB	-rwxr-xr-x
hexdump	57.51 KB	-rwxr-xr-x
hmac256	16.86 KB	-rwxr-xr-x
host	142.3 KB	-rwxr-xr-x
hostid	33.34 KB	-rwxr-xr-x
hostname	21.16 KB	-rwxr-xr-x
hostnamectl	20.83 KB	-rwxr-xr-x
htdbm	31.72 KB	-rwxr-xr-x
htdigest	21.71 KB	-rwxr-xr-x
html2text	406 B	-rwxr-xr-x
htpasswd	31.55 KB	-rwxr-xr-x
httxt2dbm	21.1 KB	-rwxr-xr-x
hunspell	144.7 KB	-rwxr-xr-x
i386	20.76 KB	-rwxr-xr-x
iceauth	41.87 KB	-rwxr-xr-x
iconv	61.43 KB	-rwxr-xr-x
id	45.44 KB	-rwxr-xr-x
identify	11.88 KB	-rwxr-xr-x
idiag-socket-details	12.09 KB	-rwxr-xr-x
idn	39.41 KB	-rwxr-xr-x
ifnames	4.03 KB	-rwxr-xr-x
iio_event_monitor	22.98 KB	-rwxr-xr-x
iio_generic_buffer	26.98 KB	-rwxr-xr-x
import	11.88 KB	-rwxr-xr-x
imunify-agent-proxy	13.13 MB	-rwxr-xr-x
imunify-antivirus	1 KB	-rwxr-xr-x
imunify-fgw-dump	7.8 MB	-rwxr-xr-x
imunify-service	1020 B	-rwxr-xr-x
imunify360-agent	1 KB	-rwxr-xr-x
imunify360-command-wrapper	9.99 KB	-rwxr-xr-x
info	249.89 KB	-rwxr-xr-x
infocmp	61.05 KB	-rwxr-xr-x
infotocap	85.31 KB	-rwxr-xr-x
innochecksum	4.54 MB	-rwxr-xr-x
install	156.16 KB	-rwxr-xr-x
instmodsh	4.1 KB	-rwxr-xr-x
intel-speed-select	93.02 KB	-rwxr-xr-x
ionice	28.98 KB	-rwxr-xr-x
iostat	57.69 KB	-rwxr-xr-x
ipcalc	46.08 KB	-rwxr-xr-x
ipcmk	29.14 KB	-rwxr-xr-x
ipcrm	28.99 KB	-rwxr-xr-x
ipcs	53.4 KB	-rwxr-xr-x
isc-config.sh	3.33 KB	-rwxr-xr-x
isosize	24.88 KB	-rwxr-xr-x
ispell	988 B	-rwxr-xr-x
isql	36.58 KB	-rwxr-xr-x
iusql	28.66 KB	-rwxr-xr-x
jcat-tool	40.91 KB	-rwxr-xr-x
jobs	28 B	-rwxr-xr-x
join	53.7 KB	-rwxr-xr-x
journalctl	76.99 KB	-rwxr-xr-x
json_pp	4.19 KB	-rwxr-xr-x
json_reformat	16.55 KB	-rwxr-xr-x
json_verify	12.27 KB	-rwxr-xr-x
json_xs	6.84 KB	-rwxr-xr-x
jsondiff	1.01 KB	-rwxr-xr-x
jsondiff-3	1.01 KB	-rwxr-xr-x
jsondiff-3.6	1.01 KB	-rwxr-xr-x
jsonpatch	3.59 KB	-rwxr-xr-x
jsonpatch-3	3.59 KB	-rwxr-xr-x
jsonpatch-3.6	3.59 KB	-rwxr-xr-x
jsonpointer	1.32 KB	-rwxr-xr-x
jsonpointer-3	1.32 KB	-rwxr-xr-x
jsonpointer-3.6	1.32 KB	-rwxr-xr-x
jsonschema-3	409 B	-rwxr-xr-x
kbd_mode	12.55 KB	-rwxr-xr-x
kbdinfo	16.56 KB	-rwxr-xr-x
kbdrate	16.45 KB	-rwxr-xr-x
kbxutil	177.35 KB	-rwxr-xr-x
kdumpctl	32.93 KB	-rwxr-xr-x
kernel-install	4.41 KB	-rwxr-xr-x
keyctl	36.82 KB	-rwxr-xr-x
kill	37.28 KB	-rwxr-xr-x
killall	29.77 KB	-rwxr-xr-x
kmod	159.95 KB	-rwxr-xr-x
krb5-config	6.98 KB	-rwxr-xr-x
kvm_stat	60.85 KB	-rwxr-xr-x
last	49.23 KB	-rwxr-xr-x
lastb	49.23 KB	-rwxr-xr-x
lastlog	20.63 KB	-rwxr-xr-x
lchfn	20.35 KB	-rwxr-xr-x
lchsh	16.35 KB	-rwxr-xr-x
ld	1.71 MB	-rwxr-xr-x
ld.bfd	1.71 MB	-rwxr-xr-x
ld.gold	2.35 MB	-rwxr-xr-x
ld.so	1.05 MB	-rwxr-xr-x
ldd	5.31 KB	-rwxr-xr-x
lefty	304.52 KB	-rwxr-xr-x
less	173.76 KB	-rwxr-xr-x
lessecho	12.4 KB	-rwxr-xr-x
lesskey	21.99 KB	-rwxr-xr-x
lesspipe.sh	3.07 KB	-rwxr-xr-x
lex	428.45 KB	-rwxr-xr-x
lexgrog	93.7 KB	-rwxr-xr-x
libgcrypt-config	3.84 KB	-rwxr-xr-x
libnetcfg	15.41 KB	-rwxr-xr-x
libpng-config	2.33 KB	-rwxr-xr-x
libpng16-config	2.33 KB	-rwxr-xr-x
libtool	359.11 KB	-rwxr-xr-x
libtoolize	126.17 KB	-rwxr-xr-x
libwmf-fontmap	13.03 KB	-rwxr-xr-x
link	33.34 KB	-rwxr-xr-x
linux-boot-prober	5.85 KB	-rwxr-xr-x
linux32	20.76 KB	-rwxr-xr-x
linux64	20.76 KB	-rwxr-xr-x
ln	70.5 KB	-rwxr-xr-x
lneato	1.51 KB	-rwxr-xr-x
loadkeys	210.53 KB	-rwxr-xr-x
loadunimap	29.03 KB	-rwxr-xr-x
locale	56.44 KB	-rwxr-xr-x
localectl	28.86 KB	-rwxr-xr-x
localedef	307.47 KB	-rwxr-xr-x
logger	49.98 KB	-rwxr-xr-x
login	40.96 KB	-rwxr-xr-x
loginctl	57.28 KB	-rwxr-xr-x
logname	33.34 KB	-rwxr-xr-x
logresolve	21.45 KB	-rwxr-xr-x
look	16.46 KB	-rwxr-xr-x
ls	139.91 KB	-rwxr-xr-x
lsattr	11.93 KB	-rwxr-xr-x
lsblk	90.14 KB	-rwxr-xr-x
lscpu	81.7 KB	-rwxr-xr-x
lsgpio	15.06 KB	-rwxr-xr-x
lsiio	22.98 KB	-rwxr-xr-x
lsinitrd	8.68 KB	-rwxr-xr-x
lsipc	73.74 KB	-rwxr-xr-x
lslocks	37.53 KB	-rwxr-xr-x
lslogins	65.62 KB	-rwxr-xr-x
lsmem	45.34 KB	-rwxr-xr-x
lsns	49.29 KB	-rwxr-xr-x
lsof	175.4 KB	-rwxr-xr-x
lsphp	937 B	-rwxr-xr-x
lsscsi	86.01 KB	-rwxr-xr-x
lua	20.45 KB	-rwxr-xr-x
luac	152.77 KB	-rwxr-xr-x
lwp-download	10.05 KB	-rwxr-xr-x
lwp-dump	2.65 KB	-rwxr-xr-x
lwp-mirror	2.36 KB	-rwxr-xr-x
lwp-request	15.84 KB	-rwxr-xr-x
m4	185.56 KB	-rwxr-xr-x
mail	408.89 KB	-rwxr-xr-x
mailx	408.89 KB	-rwxr-xr-x
make	235.32 KB	-rwxr-xr-x
make-dummy-cert	610 B	-rwxr-xr-x
makedb	24.84 KB	-rwxr-xr-x
man	112.52 KB	-rwxr-xr-x
mandb	134.52 KB	-rwxr-xr-x
manpath	33.42 KB	-rwxr-xr-x
mapscrn	24.84 KB	-rwxr-xr-x
mariadb	5.24 MB	-rwxr-xr-x
mariadb-access	109.34 KB	-rwxr-xr-x
mariadb-admin	4.8 MB	-rwxr-xr-x
mariadb-binlog	5.07 MB	-rwxr-xr-x
mariadb-check	4.8 MB	-rwxr-xr-x
mariadb-config	12.2 KB	-rwxr-xr-x
mariadb-conv	4.53 MB	-rwxr-xr-x
mariadb-convert-table-format	4.12 KB	-rwxr-xr-x
mariadb-dump	4.89 MB	-rwxr-xr-x
mariadb-dumpslow	8.05 KB	-rwxr-xr-x
mariadb-embedded	23.7 MB	-rwxr-xr-x
mariadb-find-rows	3.21 KB	-rwxr-xr-x
mariadb-fix-extensions	1.22 KB	-rwxr-xr-x
mariadb-hotcopy	34.53 KB	-rwxr-xr-x
mariadb-import	4.79 MB	-rwxr-xr-x
mariadb-install-db	22.14 KB	-rwxr-xr-x
mariadb-plugin	4.51 MB	-rwxr-xr-x
mariadb-secure-installation	13.48 KB	-rwxr-xr-x
mariadb-service-convert	2.45 KB	-rwxr-xr-x
mariadb-setpermission	17.56 KB	-rwxr-xr-x
mariadb-show	4.79 MB	-rwxr-xr-x
mariadb-slap	4.81 MB	-rwxr-xr-x
mariadb-tzinfo-to-sql	4.51 MB	-rwxr-xr-x
mariadb-upgrade	4.94 MB	-rwxr-xr-x
mariadb-waitpid	4.5 MB	-rwxr-xr-x
mariadb_config	12.2 KB	-rwxr-xr-x
mariadbd-multi	26.71 KB	-rwxr-xr-x
mariadbd-safe	30.42 KB	-rwxr-xr-x
mariadbd-safe-helper	4.47 MB	-rwxr-xr-x
mcookie	33.27 KB	-rwxr-xr-x
mcpp	9.02 KB	-rwxr-xr-x
md5sum	45.54 KB	-rwxr-xr-x
mdig	48.52 KB	-rwxr-xr-x
memstrack	83.78 KB	-rwxr-xr-x
mesg	16.36 KB	-rwxr-xr-x
miniterm-3.6.py	33.09 KB	-rwxr-xr-x
miniterm-3.py	33.09 KB	-rwxr-xr-x
mkdir	82.7 KB	-rwxr-xr-x
mkfifo	66.46 KB	-rwxr-xr-x
mkfontdir	65 B	-rwxr-xr-x
mkfontscale	41.59 KB	-rwxr-xr-x
mkinitrd	6.43 KB	-rwxr-xr-x
mknod	70.47 KB	-rwxr-xr-x
mktemp	45.66 KB	-rwxr-xr-x
mm2gv	90.53 KB	-rwxr-xr-x
mmdblookup	16.74 KB	-rwxr-xr-x
modulecmd	384.75 KB	-rwxr-xr-x
modulemd-validator	24.96 KB	-rwxr-xr-x
modutil	177.43 KB	-rwxr-xr-x
mogrify	11.88 KB	-rwxr-xr-x
mokutil	49.98 KB	-rwxr-xr-x
montage	11.88 KB	-rwxr-xr-x
more	44.94 KB	-rwxr-xr-x
mount	49.15 KB	-rwxr-xr-x
mountpoint	16.48 KB	-rwxr-xr-x
mpicalc	20.38 KB	-rwxr-xr-x
mpstat	53.51 KB	-rwxr-xr-x
msgattrib	25.58 KB	-rwxr-xr-x
msgcat	25.55 KB	-rwxr-xr-x
msgcmp	26.12 KB	-rwxr-xr-x
msgcomm	25.55 KB	-rwxr-xr-x
msgconv	21.55 KB	-rwxr-xr-x
msgen	21.55 KB	-rwxr-xr-x
msgexec	21.55 KB	-rwxr-xr-x
msgfilter	34.53 KB	-rwxr-xr-x
msgfmt	90.3 KB	-rwxr-xr-x
msggrep	43.6 KB	-rwxr-xr-x
msginit	67.85 KB	-rwxr-xr-x
msgmerge	71.48 KB	-rwxr-xr-x
msgunfmt	35.8 KB	-rwxr-xr-x
msguniq	25.56 KB	-rwxr-xr-x
msql2mysql	1.41 KB	-rwxr-xr-x
mv	143.96 KB	-rwxr-xr-x
my_print_defaults	4.5 MB	-rwxr-xr-x
myisam_ftdump	4.79 MB	-rwxr-xr-x
myisamchk	4.91 MB	-rwxr-xr-x
myisamlog	4.77 MB	-rwxr-xr-x
myisampack	4.81 MB	-rwxr-xr-x
mysql	5.24 MB	-rwxr-xr-x
mysql_config	4.51 KB	-rwxr-xr-x
mysql_embedded	23.7 MB	-rwxr-xr-x
mysql_find_rows	3.21 KB	-rwxr-xr-x
mysql_fix_extensions	1.22 KB	-rwxr-xr-x
mysql_install_db	22.14 KB	-rwxr-xr-x
mysql_plugin	4.51 MB	-rwxr-xr-x
mysql_tzinfo_to_sql	4.51 MB	-rwxr-xr-x
mysql_upgrade	4.94 MB	-rwxr-xr-x
mysql_waitpid	4.5 MB	-rwxr-xr-x
mysqlaccess	109.34 KB	-rwxr-xr-x
mysqladmin	4.8 MB	-rwxr-xr-x
mysqlbinlog	5.07 MB	-rwxr-xr-x
mysqlcheck	4.8 MB	-rwxr-xr-x
mysqld_multi	26.71 KB	-rwxr-xr-x
mysqld_safe	30.42 KB	-rwxr-xr-x
mysqld_safe_helper	4.47 MB	-rwxr-xr-x
mysqldump	4.89 MB	-rwxr-xr-x
mysqlimport	4.79 MB	-rwxr-xr-x
mysqlshow	4.79 MB	-rwxr-xr-x
mysqlslap	4.81 MB	-rwxr-xr-x
mytop	72.03 KB	-rwxr-xr-x
nail	408.89 KB	-rwxr-xr-x
named-rrchecker	19.88 KB	-rwxr-xr-x
namei	33.1 KB	-rwxr-xr-x
nano	247.94 KB	-rwxr-xr-x
nc	49.39 KB	-rwxr-xr-x
ncurses6-config	5.87 KB	-rwxr-xr-x
ncursesw6-config	5.88 KB	-rwxr-xr-x
ndptool	24.45 KB	-rwxr-xr-x
neato	12.26 KB	-rwxr-xr-x
needs-restarting	3.62 KB	-rwxr-xr-x
neqn	908 B	-rwxr-xr-x
netcat	49.39 KB	-rwxr-xr-x
netstat	158.68 KB	-rwxr-xr-x
newgidmap	47.81 KB	-rwxr-xr-x
newgrp	42.46 KB	-rwxr-xr-x
newuidmap	47.77 KB	-rwxr-xr-x
nf-ct-add	16.46 KB	-rwxr-xr-x
nf-ct-events	12.38 KB	-rwxr-xr-x
nf-ct-list	16.49 KB	-rwxr-xr-x
nf-exp-add	16.87 KB	-rwxr-xr-x
nf-exp-delete	16.66 KB	-rwxr-xr-x
nf-exp-list	16.49 KB	-rwxr-xr-x
nf-log	12.35 KB	-rwxr-xr-x
nf-monitor	12.36 KB	-rwxr-xr-x
nf-queue	16.35 KB	-rwxr-xr-x
ngettext	48.97 KB	-rwxr-xr-x
nice	37.33 KB	-rwxr-xr-x
nisdomainname	21.16 KB	-rwxr-xr-x
nl	45.55 KB	-rwxr-xr-x
nl-addr-add	12.34 KB	-rwxr-xr-x
nl-addr-delete	16.77 KB	-rwxr-xr-x
nl-addr-list	16.88 KB	-rwxr-xr-x
nl-class-add	16.73 KB	-rwxr-xr-x
nl-class-delete	12.63 KB	-rwxr-xr-x
nl-class-list	12.59 KB	-rwxr-xr-x
nl-classid-lookup	12.47 KB	-rwxr-xr-x
nl-cls-add	16.77 KB	-rwxr-xr-x
nl-cls-delete	16.77 KB	-rwxr-xr-x
nl-cls-list	12.73 KB	-rwxr-xr-x
nl-fib-lookup	12.5 KB	-rwxr-xr-x
nl-link-enslave	11.87 KB	-rwxr-xr-x
nl-link-ifindex2name	11.87 KB	-rwxr-xr-x
nl-link-list	12.23 KB	-rwxr-xr-x
nl-link-name2ifindex	11.86 KB	-rwxr-xr-x
nl-link-release	11.86 KB	-rwxr-xr-x
nl-link-set	12.77 KB	-rwxr-xr-x
nl-link-stats	12.59 KB	-rwxr-xr-x
nl-list-caches	12.27 KB	-rwxr-xr-x
nl-list-sockets	11.87 KB	-rwxr-xr-x
nl-monitor	12.52 KB	-rwxr-xr-x
nl-neigh-add	12.63 KB	-rwxr-xr-x
nl-neigh-delete	12.66 KB	-rwxr-xr-x
nl-neigh-list	12.19 KB	-rwxr-xr-x
nl-neightbl-list	12.01 KB	-rwxr-xr-x
nl-pktloc-lookup	12.56 KB	-rwxr-xr-x
nl-qdisc-add	12.65 KB	-rwxr-xr-x
nl-qdisc-delete	12.63 KB	-rwxr-xr-x
nl-qdisc-list	16.74 KB	-rwxr-xr-x
nl-route-add	16.39 KB	-rwxr-xr-x
nl-route-delete	16.88 KB	-rwxr-xr-x
nl-route-get	12.35 KB	-rwxr-xr-x
nl-route-list	16.44 KB	-rwxr-xr-x
nl-rule-list	12.05 KB	-rwxr-xr-x
nl-tctree-list	12.66 KB	-rwxr-xr-x
nl-util-addr	11.85 KB	-rwxr-xr-x
nm	50.38 KB	-rwxr-xr-x
nm-online	20.84 KB	-rwxr-xr-x
nmcli	1009 KB	-rwxr-xr-x
nmtui	784.12 KB	-rwxr-xr-x
nmtui-connect	784.12 KB	-rwxr-xr-x
nmtui-edit	784.12 KB	-rwxr-xr-x
nmtui-hostname	784.12 KB	-rwxr-xr-x
nohup	37.41 KB	-rwxr-xr-x
nop	12.5 KB	-rwxr-xr-x
nproc	37.41 KB	-rwxr-xr-x
nroff	3.23 KB	-rwxr-xr-x
nsenter	33.3 KB	-rwxr-xr-x
nslookup	146.26 KB	-rwxr-xr-x
nss-policy-check	16.3 KB	-rwxr-xr-x
nsupdate	73.05 KB	-rwxr-xr-x
numfmt	65.64 KB	-rwxr-xr-x
objcopy	240.07 KB	-rwxr-xr-x
objdump	419.76 KB	-rwxr-xr-x
od	73.8 KB	-rwxr-xr-x
odbc_config	11.84 KB	-rwxr-xr-x
odbcinst	28.88 KB	-rwxr-xr-x
open	20.97 KB	-rwxr-xr-x
openssl	745.95 KB	-rwxr-xr-x
openvt	20.97 KB	-rwxr-xr-x
os-prober	5.78 KB	-rwxr-xr-x
osage	12.26 KB	-rwxr-xr-x
p11-kit	37.15 KB	-rwxr-xr-x
package-cleanup	3.62 KB	-rwxr-xr-x
page_owner_sort	11.34 KB	-rwxr-xr-x
pango-list	11.88 KB	-rwxr-xr-x
pango-view	57.44 KB	-rwxr-xr-x
paperconf	13.07 KB	-rwxr-xr-x
passwd	32.77 KB	-rwsr-xr-x
paste	37.4 KB	-rwxr-xr-x
patch	206.46 KB	-rwxr-xr-x
patchwork	12.26 KB	-rwxr-xr-x
pathchk	37.34 KB	-rwxr-xr-x
pathfix.py	6.63 KB	-rwxr-xr-x
pcre2-config	1.9 KB	-rwxr-xr-x
pdf2dsc	698 B	-rwxr-xr-x
pdf2ps	909 B	-rwxr-xr-x
pdns_control	486.11 KB	-rwxr-xr-x
pdnsutil	5.19 MB	-rwxr-xr-x
peekfd	16.51 KB	-rwxr-xr-x
perl	12.43 KB	-rwxr-xr-x
perl5.26.3	12.43 KB	-rwxr-xr-x
perlbug	44.39 KB	-rwxr-xr-x
perldoc	118 B	-rwxr-xr-x
perlivp	10.56 KB	-rwxr-xr-x
perlml	6.61 KB	-rwxr-xr-x
perlthanks	44.39 KB	-rwxr-xr-x
perror	4.7 MB	-rwxr-xr-x
pflags	2.57 KB	-rwxr-xr-x
pftp	101.2 KB	-rwxr-xr-x
pgrep	28.84 KB	-rwxr-xr-x
php	937 B	-rwxr-xr-x
pic	293.84 KB	-rwxr-xr-x
piconv	8.08 KB	-rwxr-xr-x
pidof	16.7 KB	-rwxr-xr-x
pidstat	65.72 KB	-rwxr-xr-x
pigz	125.38 KB	-rwxr-xr-x
pinentry	2.35 KB	-rwxr-xr-x
pinentry-curses	77.89 KB	-rwxr-xr-x
ping	66.13 KB	-rwxr-xr-x
pinky	41.46 KB	-rwxr-xr-x
pip-3	209 B	-rwxr-xr-x
pip-3.6	209 B	-rwxr-xr-x
pip3	209 B	-rwxr-xr-x
pip3.6	209 B	-rwxr-xr-x
pk12util	111.12 KB	-rwxr-xr-x
pkaction	16.38 KB	-rwxr-xr-x
pkcheck	24.43 KB	-rwxr-xr-x
pkcon	81.32 KB	-rwxr-xr-x
pkexec	28.41 KB	-rwxr-xr-x
pkg-config	40.04 KB	-rwxr-xr-x
pkgconf	40.04 KB	-rwxr-xr-x
pkill	28.84 KB	-rwxr-xr-x
pkla-admin-identities	25.72 KB	-rwxr-xr-x
pkla-check-authorization	33.78 KB	-rwxr-xr-x
pkmon	20.75 KB	-rwxr-xr-x
pkttyagent	20.38 KB	-rwxr-xr-x
pl2pm	4.43 KB	-rwxr-xr-x
pldd	16.75 KB	-rwxr-xr-x
pmap	32.78 KB	-rwxr-xr-x
png-fix-itxt	11.85 KB	-rwxr-xr-x
pngfix	52.85 KB	-rwxr-xr-x
pod2html	4.04 KB	-rwxr-xr-x
pod2man	14.68 KB	-rwxr-xr-x
pod2text	10.55 KB	-rwxr-xr-x
pod2usage	3.86 KB	-rwxr-xr-x
podchecker	3.57 KB	-rwxr-xr-x
podselect	2.47 KB	-rwxr-xr-x
post-grohtml	238.73 KB	-rwxr-xr-x
powernow-k8-decode	10.88 KB	-rwxr-xr-x
pr	82.15 KB	-rwxr-xr-x
pre-grohtml	130.55 KB	-rwxr-xr-x
precat	5.52 KB	-rwxr-xr-x
preconv	57.65 KB	-rwxr-xr-x
preunzip	5.52 KB	-rwxr-xr-x
prezip	5.52 KB	-rwxr-xr-x
prezip-bin	11.98 KB	-rwxr-xr-x
printenv	33.32 KB	-rwxr-xr-x
printf	53.56 KB	-rwxr-xr-x
prlimit	37.54 KB	-rwxr-xr-x
procan	82.6 KB	-rwxr-xr-x
protoc	16.49 KB	-rwxr-xr-x
protoc-c	244.79 KB	-rwxr-xr-x
protoc-gen-c	244.79 KB	-rwxr-xr-x
prove	13.24 KB	-rwxr-xr-x
prtstat	20.51 KB	-rwxr-xr-x
prune	16.73 KB	-rwxr-xr-x
ps	134.75 KB	-rwxr-xr-x
ps2ascii	631 B	-rwxr-xr-x
ps2epsi	2.69 KB	-rwxr-xr-x
ps2pdf	272 B	-rwxr-xr-x
ps2pdf12	215 B	-rwxr-xr-x
ps2pdf13	215 B	-rwxr-xr-x
ps2pdf14	215 B	-rwxr-xr-x
ps2pdfwr	1.07 KB	-rwxr-xr-x
ps2ps	647 B	-rwxr-xr-x
ps2ps2	669 B	-rwxr-xr-x
psfaddtable	20.66 KB	-rwxr-xr-x
psfgettable	20.66 KB	-rwxr-xr-x
psfstriptable	20.66 KB	-rwxr-xr-x
psfxtable	20.66 KB	-rwxr-xr-x
pslog	12.48 KB	-rwxr-xr-x
pstree	33.53 KB	-rwxr-xr-x
pstree.x11	33.53 KB	-rwxr-xr-x
ptar	3.38 KB	-rwxr-xr-x
ptardiff	2.48 KB	-rwxr-xr-x
ptargrep	4.2 KB	-rwxr-xr-x
ptx	78 KB	-rwxr-xr-x
pv	73.56 KB	-rwxr-xr-x
pwd	37.42 KB	-rwxr-xr-x
pwdx	12.68 KB	-rwxr-xr-x
pwmake	12.27 KB	-rwxr-xr-x
pwscore	12.27 KB	-rwxr-xr-x
pybabel	388 B	-rwxr-xr-x
pydoc-3	89 B	-rwxr-xr-x
pydoc3	89 B	-rwxr-xr-x
pydoc3.12	79 B	-rwxr-xr-x
pydoc3.6	89 B	-rwxr-xr-x
pyjwt	384 B	-rwxr-xr-x
python-html2text	406 B	-rwxr-xr-x
python3	11.59 KB	-rwxr-xr-x
python3-config	204 B	-rwxr-xr-x
python3-html2text	406 B	-rwxr-xr-x
python3.12	7.57 KB	-rwxr-xr-x
python3.6	11.59 KB	-rwxr-xr-x
python3.6-config	204 B	-rwxr-xr-x
python3.6m	11.59 KB	-rwxr-xr-x
python3.6m-config	204 B	-rwxr-xr-x
python3.6m-x86_64-config	3.54 KB	-rwxr-xr-x
pyvenv-3	446 B	-rwxr-xr-x
pyvenv-3.6	446 B	-rwxr-xr-x
qemu-ga	505.49 KB	-rwxr-xr-x
quota	91.49 KB	-rwsr-xr-x
quotasync	74.69 KB	-rwxr-xr-x
ranlib	61.97 KB	-rwxr-xr-x
raw	16.5 KB	-rwxr-xr-x
read	28 B	-rwxr-xr-x
readelf	624.54 KB	-rwxr-xr-x
readlink	45.88 KB	-rwxr-xr-x
realpath	49.94 KB	-rwxr-xr-x
recode-sr-latin	17.99 KB	-rwxr-xr-x
rename	16.5 KB	-rwxr-xr-x
renew-dummy-cert	725 B	-rwxr-xr-x
renice	16.46 KB	-rwxr-xr-x
replace	4.48 MB	-rwxr-xr-x
repo-graph	3.62 KB	-rwxr-xr-x
repoclosure	3.62 KB	-rwxr-xr-x
repodiff	3.62 KB	-rwxr-xr-x
repomanage	3.62 KB	-rwxr-xr-x
repoquery	3.62 KB	-rwxr-xr-x
reposync	3.62 KB	-rwxr-xr-x
repotrack	3.62 KB	-rwxr-xr-x
rescan-scsi-bus.sh	38.24 KB	-rwxr-xr-x
reset	24.76 KB	-rwxr-xr-x
resizecons	20.77 KB	-rwxr-xr-x
resolve_stack_dump	4.5 MB	-rwxr-xr-x
resolvectl	195.75 KB	-rwxr-xr-x
resolveip	4.5 MB	-rwxr-xr-x
rev	12.46 KB	-rwxr-xr-x
rm	70.38 KB	-rwxr-xr-x
rmdir	45.46 KB	-rwxr-xr-x
rnano	247.94 KB	-rwxr-xr-x
rpcbind	61.55 KB	-rwxr-xr-x
rpcinfo	32.64 KB	-rwxr-xr-x
rpm	20.85 KB	-rwxr-xr-x
rpm2archive	20.46 KB	-rwxr-xr-x
rpm2cpio	11.84 KB	-rwxr-xr-x
rpmdb	16.96 KB	-rwxr-xr-x
rpmkeys	16.87 KB	-rwxr-xr-x
rpmquery	20.85 KB	-rwxr-xr-x
rpmverify	20.85 KB	-rwxr-xr-x
rsync	522.35 KB	-rwxr-xr-x
rsyslog-recover-qi.pl	5.96 KB	-rwxr-xr-x
run-parts	1.94 KB	-rwxr-xr-x
run-with-aspell	85 B	-rwxr-xr-x
runcon	37.38 KB	-rwxr-xr-x
rvi	1.13 MB	-rwxr-xr-x
rview	1.13 MB	-rwxr-xr-x
sadf	334.57 KB	-rwxr-xr-x
sandbox	17.62 KB	-rwxr-xr-x
sar	135.77 KB	-rwxr-xr-x
sccmap	20.62 KB	-rwxr-xr-x
scl	36.87 KB	-rwxr-xr-x
scl_enabled	258 B	-rwxr-xr-x
scl_source	1.82 KB	-rwxr-xr-x
scp	102.84 KB	-rwxr-xr-x
script	36.8 KB	-rwxr-xr-x
scriptreplay	29 KB	-rwxr-xr-x
scsi-rescan	38.24 KB	-rwxr-xr-x
scsi_logging_level	8.38 KB	-rwxr-xr-x
scsi_mandat	3.52 KB	-rwxr-xr-x
scsi_readcap	1.3 KB	-rwxr-xr-x
scsi_ready	1.09 KB	-rwxr-xr-x
scsi_satl	3.77 KB	-rwxr-xr-x
scsi_start	1.25 KB	-rwxr-xr-x
scsi_stop	1.44 KB	-rwxr-xr-x
scsi_temperature	936 B	-rwxr-xr-x
sdiff	105.33 KB	-rwxr-xr-x
sealert	27.27 KB	-rwxr-xr-x
secon	25.46 KB	-rwxr-xr-x
secret-tool	21.17 KB	-rwxr-xr-x
sed	115.27 KB	-rwxr-xr-x
sedismod	273.66 KB	-rwxr-xr-x
sedispol	198.48 KB	-rwxr-xr-x
semodule_expand	12.28 KB	-rwxr-xr-x
semodule_link	12.28 KB	-rwxr-xr-x
semodule_package	16.68 KB	-rwxr-xr-x
semodule_unpackage	12.3 KB	-rwxr-xr-x
seq	53.45 KB	-rwxr-xr-x
sessreg	17.38 KB	-rwxr-xr-x
setarch	20.76 KB	-rwxr-xr-x
setfacl	37.65 KB	-rwxr-xr-x
setfont	45.19 KB	-rwxr-xr-x
setkeycodes	12.56 KB	-rwxr-xr-x
setleds	16.6 KB	-rwxr-xr-x
setmetamode	12.56 KB	-rwxr-xr-x
setpriv	45.16 KB	-rwxr-xr-x
setsid	16.38 KB	-rwxr-xr-x
setterm	45.13 KB	-rwxr-xr-x
setup-nsssysinit	1.5 KB	-rwxr-xr-x
setup-nsssysinit.sh	1.5 KB	-rwxr-xr-x
setvtrgb	16.64 KB	-rwxr-xr-x
sfdp	12.26 KB	-rwxr-xr-x
sftp	159.74 KB	-rwxr-xr-x
sg	42.46 KB	-rwxr-xr-x
sg_bg_ctl	16.07 KB	-rwxr-xr-x
sg_compare_and_write	20.9 KB	-rwxr-xr-x
sg_copy_results	20.81 KB	-rwxr-xr-x
sg_dd	44.58 KB	-rwxr-xr-x
sg_decode_sense	20.33 KB	-rwxr-xr-x
sg_emc_trespass	12.26 KB	-rwxr-xr-x
sg_format	33.37 KB	-rwxr-xr-x
sg_get_config	33.31 KB	-rwxr-xr-x
sg_get_lba_status	20.46 KB	-rwxr-xr-x
sg_ident	16.17 KB	-rwxr-xr-x
sg_inq	117.91 KB	-rwxr-xr-x
sg_logs	150.02 KB	-rwxr-xr-x
sg_luns	24.85 KB	-rwxr-xr-x
sg_map	16.41 KB	-rwxr-xr-x
sg_map26	24.87 KB	-rwxr-xr-x
sg_modes	43.88 KB	-rwxr-xr-x
sg_opcodes	28.69 KB	-rwxr-xr-x
sg_persist	34.13 KB	-rwxr-xr-x
sg_prevent	12.07 KB	-rwxr-xr-x
sg_raw	24.38 KB	-rwxr-xr-x
sg_rbuf	20.84 KB	-rwxr-xr-x
sg_rdac	15.88 KB	-rwxr-xr-x
sg_read	24.41 KB	-rwxr-xr-x
sg_read_attr	34.79 KB	-rwxr-xr-x
sg_read_block_limits	12.12 KB	-rwxr-xr-x
sg_read_buffer	20.96 KB	-rwxr-xr-x
sg_read_long	16.27 KB	-rwxr-xr-x
sg_readcap	20.86 KB	-rwxr-xr-x
sg_reassign	16.22 KB	-rwxr-xr-x
sg_referrals	16.23 KB	-rwxr-xr-x
sg_rep_zones	20.66 KB	-rwxr-xr-x
sg_requests	16.3 KB	-rwxr-xr-x
sg_reset	16.73 KB	-rwxr-xr-x
sg_reset_wp	16.17 KB	-rwxr-xr-x
sg_rmsn	12.06 KB	-rwxr-xr-x
sg_rtpg	16.16 KB	-rwxr-xr-x
sg_safte	20.27 KB	-rwxr-xr-x
sg_sanitize	24.58 KB	-rwxr-xr-x
sg_sat_identify	16.71 KB	-rwxr-xr-x
sg_sat_phy_event	20.59 KB	-rwxr-xr-x
sg_sat_read_gplog	16.3 KB	-rwxr-xr-x
sg_sat_set_features	16.27 KB	-rwxr-xr-x
sg_scan	16.5 KB	-rwxr-xr-x
sg_seek	16.85 KB	-rwxr-xr-x
sg_senddiag	25.27 KB	-rwxr-xr-x
sg_ses	118.23 KB	-rwxr-xr-x
sg_ses_microcode	29.48 KB	-rwxr-xr-x
sg_start	20.93 KB	-rwxr-xr-x
sg_stpg	20.3 KB	-rwxr-xr-x
sg_stream_ctl	20.27 KB	-rwxr-xr-x
sg_sync	16.22 KB	-rwxr-xr-x
sg_test_rwbuf	20.73 KB	-rwxr-xr-x
sg_timestamp	20.74 KB	-rwxr-xr-x
sg_turs	16.74 KB	-rwxr-xr-x
sg_unmap	24.32 KB	-rwxr-xr-x
sg_verify	20.46 KB	-rwxr-xr-x
sg_vpd	108.75 KB	-rwxr-xr-x
sg_wr_mode	20.3 KB	-rwxr-xr-x
sg_write_buffer	21.24 KB	-rwxr-xr-x
sg_write_long	16.33 KB	-rwxr-xr-x
sg_write_same	24.48 KB	-rwxr-xr-x
sg_write_verify	20.78 KB	-rwxr-xr-x
sg_write_x	53.75 KB	-rwxr-xr-x
sg_xcopy	40.59 KB	-rwxr-xr-x
sg_zone	16.3 KB	-rwxr-xr-x
sginfo	74.85 KB	-rwxr-xr-x
sgm_dd	32.55 KB	-rwxr-xr-x
sgp_dd	36.95 KB	-rwxr-xr-x
sh	1.1 MB	-rwxr-xr-x
sha1hmac	32.66 KB	-rwxr-xr-x
sha1sum	45.55 KB	-rwxr-xr-x
sha224hmac	32.66 KB	-rwxr-xr-x
sha224sum	45.58 KB	-rwxr-xr-x
sha256hmac	32.66 KB	-rwxr-xr-x
sha256sum	45.58 KB	-rwxr-xr-x
sha384hmac	32.66 KB	-rwxr-xr-x
sha384sum	45.59 KB	-rwxr-xr-x
sha512hmac	32.66 KB	-rwxr-xr-x
sha512sum	45.59 KB	-rwxr-xr-x
shasum	9.66 KB	-rwxr-xr-x
showconsolefont	20.73 KB	-rwxr-xr-x
showkey	16.58 KB	-rwxr-xr-x
showrgb	13.05 KB	-rwxr-xr-x
shred	61.85 KB	-rwxr-xr-x
shuf	58.09 KB	-rwxr-xr-x
sieve-dump	30.84 KB	-rwxr-xr-x
sieve-filter	40.27 KB	-rwxr-xr-x
sieve-test	40.2 KB	-rwxr-xr-x
sievec	35.1 KB	-rwxr-xr-x
signver	114.79 KB	-rwxr-xr-x
sim_client	16.27 KB	-rwxr-xr-x
size	33.25 KB	-rwxr-xr-x
skill	28.8 KB	-rwxr-xr-x
slabinfo	36.15 KB	-rwxr-xr-x
slabtop	20.84 KB	-rwxr-xr-x
sleep	37.4 KB	-rwxr-xr-x
slencheck	12.29 KB	-rwxr-xr-x
sm3hmac	32.66 KB	-rwxr-xr-x
snice	28.8 KB	-rwxr-xr-x
socat	406.49 KB	-rwxr-xr-x
soelim	42.55 KB	-rwxr-xr-x
sort	123.48 KB	-rwxr-xr-x
sotruss	4.18 KB	-rwxr-xr-x
spell	122 B	-rwxr-xr-x
splain	18.7 KB	-rwxr-xr-x
split	58.05 KB	-rwxr-xr-x
sprof	28.67 KB	-rwxr-xr-x
sqlite3	1.28 MB	-rwxr-xr-x
sscg	57.14 KB	-rwxr-xr-x
ssh	757.61 KB	-rwxr-xr-x
ssh-add	346.13 KB	-rwxr-xr-x
ssh-agent	325.59 KB	-rwxr-xr-x
ssh-copy-id	10.44 KB	-rwxr-xr-x
ssh-keygen	427.17 KB	-rwxr-xr-x
ssh-keyscan	432.59 KB	-rwxr-xr-x
ssltap	130.51 KB	-rwxr-xr-x
sss_ssh_authorizedkeys	28.78 KB	-rwxr-xr-x
sss_ssh_knownhostsproxy	28.78 KB	-rwxr-xr-x
stat	86.16 KB	-rwxr-xr-x
stdbuf	49.5 KB	-rwxr-xr-x
strace	1.94 MB	-rwxr-xr-x
strace-log-merge	1.78 KB	-rwxr-xr-x
stream	11.87 KB	-rwxr-xr-x
strings	37.43 KB	-rwxr-xr-x
strip	240.09 KB	-rwxr-xr-x
stty	77.61 KB	-rwxr-xr-x
su	48.99 KB	-rwsr-x---
sudo	186.52 KB	---s--x--x
sudoedit	186.52 KB	---s--x--x
sudoreplay	119.2 KB	---x--x--x
sum	45.53 KB	-rwxr-xr-x
sw-engine	20.12 MB	-rwxr-xr-x
sxpm	28.81 KB	-rwxr-xr-x
sync	37.35 KB	-rwxr-xr-x
systemctl	218.45 KB	-rwxr-xr-x
systemd-analyze	1.56 MB	-rwxr-xr-x
systemd-ask-password	12.02 KB	-rwxr-xr-x
systemd-cat	16.03 KB	-rwxr-xr-x
systemd-cgls	16.44 KB	-rwxr-xr-x
systemd-cgtop	32.88 KB	-rwxr-xr-x
systemd-delta	24.45 KB	-rwxr-xr-x
systemd-detect-virt	11.88 KB	-rwxr-xr-x
systemd-escape	16.01 KB	-rwxr-xr-x
systemd-firstboot	36.98 KB	-rwxr-xr-x
systemd-hwdb	28.91 KB	-rwxr-xr-x
systemd-inhibit	16.03 KB	-rwxr-xr-x
systemd-machine-id-setup	24.75 KB	-rwxr-xr-x
systemd-mount	52.63 KB	-rwxr-xr-x
systemd-notify	16.03 KB	-rwxr-xr-x
systemd-path	16.02 KB	-rwxr-xr-x
systemd-resolve	195.75 KB	-rwxr-xr-x
systemd-run	48.95 KB	-rwxr-xr-x
systemd-socket-activate	24.77 KB	-rwxr-xr-x
systemd-stdio-bridge	16.02 KB	-rwxr-xr-x
systemd-sysusers	53.05 KB	-rwxr-xr-x
systemd-tmpfiles	73.3 KB	-rwxr-xr-x
systemd-tty-ask-password-agent	32.82 KB	-rwxr-xr-x
systemd-umount	52.63 KB	-rwxr-xr-x
tabs	16.55 KB	-rwxr-xr-x
tac	41.49 KB	-rwxr-xr-x
tail	74.13 KB	-rwxr-xr-x
tapestat	41.32 KB	-rwxr-xr-x
tar	448.99 KB	-rwxr-xr-x
taskset	37.26 KB	-rwxr-xr-x
tbl	154.61 KB	-rwxr-xr-x
tclsh	9.04 KB	-rwxr-xr-x
tclsh8.6	9.04 KB	-rwxr-xr-x
tcptraceroute	1.55 KB	-rwxr-xr-x
teamd	160.52 KB	-rwxr-xr-x
teamdctl	30.37 KB	-rwxr-xr-x
teamnl	20.47 KB	-rwxr-xr-x
tee	41.48 KB	-rwxr-xr-x
test	53.55 KB	-rwxr-xr-x
tic	85.31 KB	-rwxr-xr-x
timedatectl	36.96 KB	-rwxr-xr-x
timeout	41.85 KB	-rwxr-xr-x
tload	16.76 KB	-rwxr-xr-x
tmon	39.63 KB	-rwxr-xr-x
tmpwatch	35.47 KB	-rwxr-xr-x
toe	16.45 KB	-rwxr-xr-x
top	121.7 KB	-rwxr-xr-x
touch	93.94 KB	-rwxr-xr-x
tput	24.8 KB	-rwxr-xr-x
tr	49.63 KB	-rwxr-xr-x
tracepath	20.44 KB	-rwxr-xr-x
traceroute	70.97 KB	-rwxr-xr-x
traceroute6	70.97 KB	-rwxr-xr-x
tred	16.59 KB	-rwxr-xr-x
troff	805.02 KB	-rwxr-xr-x
true	33.33 KB	-rwxr-xr-x
truncate	41.36 KB	-rwxr-xr-x
trust	219.55 KB	-rwxr-xr-x
tset	24.76 KB	-rwxr-xr-x
tsort	41.49 KB	-rwxr-xr-x
tty	33.31 KB	-rwxr-xr-x
turbostat	130.8 KB	-rwxr-xr-x
twopi	12.26 KB	-rwxr-xr-x
type	28 B	-rwxr-xr-x
tzselect	15.01 KB	-rwxr-xr-x
uapi	3.33 MB	-rwxr-xr-x
ucs2any	24.41 KB	-rwxr-xr-x
udevadm	424.56 KB	-rwxr-xr-x
udisksctl	60.73 KB	-rwxr-xr-x
ul	20.59 KB	-rwxr-xr-x
ulimit	30 B	-rwxr-xr-x
umask	29 B	-rwxr-xr-x
umount	32.75 KB	-rwxr-xr-x
unalias	31 B	-rwxr-xr-x
uname	37.33 KB	-rwxr-xr-x
uname26	20.76 KB	-rwxr-xr-x
unexpand	45.61 KB	-rwxr-xr-x
unflatten	16.63 KB	-rwxr-xr-x
unicode_start	2.55 KB	-rwxr-xr-x
unicode_stop	363 B	-rwxr-xr-x
uniq	49.64 KB	-rwxr-xr-x
unlink	33.34 KB	-rwxr-xr-x
unpigz	125.38 KB	-rwxr-xr-x
unshare	24.93 KB	-rwxr-xr-x
unversioned-python	157 B	-rwxr-xr-x
unxz	82.09 KB	-rwxr-xr-x
unzip	201.88 KB	-rwxr-xr-x
unzipsfx	101.48 KB	-rwxr-xr-x
update-ca-trust	1.24 KB	-rwxr-xr-x
update-crypto-policies	87 B	-rwxr-xr-x
update-gtk-immodules	313 B	-rwxr-xr-x
update-mime-database	57.22 KB	-rwxr-xr-x
update_cpanelv2	5.69 MB	-rwxr-xr-x
uptime	12.59 KB	-rwxr-xr-x
users	37.4 KB	-rwxr-xr-x
usleep	11.86 KB	-rwxr-xr-x
utmpdump	28.66 KB	-rwxr-xr-x
uuclient	15.88 KB	-rwxr-xr-x
uuidgen	16.38 KB	-rwxr-xr-x
uuidparse	37.13 KB	-rwxr-xr-x
vdir	139.91 KB	-rwxr-xr-x
vi	1.13 MB	-rwxr-xr-x
view	1.13 MB	-rwxr-xr-x
vimdot	1.06 KB	-rwxr-xr-x
vlock	20.83 KB	-rwxr-xr-x
vmstat	36.79 KB	-rwxr-xr-x
w	20.75 KB	-rwxr-xr-x
wait	28 B	-rwxr-xr-x
wall	33.05 KB	-rwxr-xr-x
watch	29.19 KB	-rwxr-xr-x
watchgnupg	16.44 KB	-rwxr-xr-x
wc	49.64 KB	-rwxr-xr-x
wdctl	36.98 KB	-rwxr-xr-x
wget	521.41 KB	-rwxr-xr-x
whatis	54.04 KB	-rwxr-xr-x
whereis	29.27 KB	-rwxr-xr-x
which	29.38 KB	-rwxr-xr-x
whiptail	33.09 KB	-rwxr-xr-x
who	53.59 KB	-rwxr-xr-x
whoami	33.34 KB	-rwxr-xr-x
wmf2eps	17.15 KB	-rwxr-xr-x
wmf2fig	17.15 KB	-rwxr-xr-x
wmf2gd	17.14 KB	-rwxr-xr-x
wmf2svg	17.16 KB	-rwxr-xr-x
wmf2x	17.13 KB	-rwxr-xr-x
word-list-compress	11.99 KB	-rwxr-xr-x
write	20.62 KB	-rwxr-xr-x
wsrep_sst_backup	2.39 KB	-rwxr-xr-x
wsrep_sst_common	67.46 KB	-rw-r--r--
wsrep_sst_mariabackup	49.27 KB	-rwxr-xr-x
wsrep_sst_mysqldump	8.1 KB	-rwxr-xr-x
wsrep_sst_rsync	29.92 KB	-rwxr-xr-x
wsrep_sst_rsync_wan	29.92 KB	-rwxr-xr-x
x86_64	20.76 KB	-rwxr-xr-x
x86_64-redhat-linux-c++	1.21 MB	-rwxr-xr-x
x86_64-redhat-linux-g++	1.21 MB	-rwxr-xr-x
x86_64-redhat-linux-gcc	1.21 MB	-rwxr-xr-x
x86_64-redhat-linux-gcc-8	1.21 MB	-rwxr-xr-x
x86_64-redhat-linux-gnu-pkg-co...	424 B	-rwxr-xr-x
x86_energy_perf_policy	31.95 KB	-rwxr-xr-x
xargs	74.11 KB	-rwxr-xr-x
xgamma	17.08 KB	-rwxr-xr-x
xgettext	283.88 KB	-rwxr-xr-x
xhost	17.12 KB	-rwxr-xr-x
xinput	63.61 KB	-rwxr-xr-x
xkill	17.1 KB	-rwxr-xr-x
xml2-config	1.71 KB	-rwxr-xr-x
xmlcatalog	20.38 KB	-rwxr-xr-x
xmllint	73.37 KB	-rwxr-xr-x
xmlwf	36.97 KB	-rwxr-xr-x
xmodmap	39.98 KB	-rwxr-xr-x
xorg-x11-fonts-update-dirs	1.29 KB	-rwxr--r--
xrandr	65.46 KB	-rwxr-xr-x
xrdb	33.98 KB	-rwxr-xr-x
xrefresh	17.94 KB	-rwxr-xr-x
xset	37.2 KB	-rwxr-xr-x
xsetpointer	13.05 KB	-rwxr-xr-x
xsetroot	21.44 KB	-rwxr-xr-x
xslt-config	2.36 KB	-rwxr-xr-x
xsltproc	28.47 KB	-rwxr-xr-x
xstdcmap	17.68 KB	-rwxr-xr-x
xsubpp	4.96 KB	-rwxr-xr-x
xz	82.09 KB	-rwxr-xr-x
xzcat	82.09 KB	-rwxr-xr-x
xzcmp	6.48 KB	-rwxr-xr-x
xzdec	16.48 KB	-rwxr-xr-x
xzdiff	6.48 KB	-rwxr-xr-x
xzegrep	5.76 KB	-rwxr-xr-x
xzfgrep	5.76 KB	-rwxr-xr-x
xzgrep	5.76 KB	-rwxr-xr-x
xzless	1.76 KB	-rwxr-xr-x
xzmore	2.11 KB	-rwxr-xr-x
yat2m	33.34 KB	-rwxr-xr-x
yes	33.37 KB	-rwxr-xr-x
ypdomainname	21.16 KB	-rwxr-xr-x
yum	2.05 KB	-rwxr-xr-x
yum-builddep	3.62 KB	-rwxr-xr-x
yum-config-manager	3.62 KB	-rwxr-xr-x
yum-debug-dump	3.62 KB	-rwxr-xr-x
yum-debug-restore	3.62 KB	-rwxr-xr-x
yum-groups-manager	3.62 KB	-rwxr-xr-x
yumdownloader	3.62 KB	-rwxr-xr-x
zcat	1.94 KB	-rwxr-xr-x
zcmp	1.64 KB	-rwxr-xr-x
zdiff	5.74 KB	-rwxr-xr-x
zegrep	29 B	-rwxr-xr-x
zfgrep	29 B	-rwxr-xr-x
zforce	2.03 KB	-rwxr-xr-x
zgrep	7.4 KB	-rwxr-xr-x
zip	229 KB	-rwxr-xr-x
zipcloak	102.91 KB	-rwxr-xr-x
zipdetails	49.39 KB	-rwxr-xr-x
zipgrep	2.88 KB	-rwxr-xr-x
zipinfo	201.88 KB	-rwxr-xr-x
zipnote	97.76 KB	-rwxr-xr-x
zipsplit	97.76 KB	-rwxr-xr-x
zless	2.15 KB	-rwxr-xr-x
zmore	1.8 KB	-rwxr-xr-x
znew	4.45 KB	-rwxr-xr-x
zone2json	1.39 MB	-rwxr-xr-x
zone2sql	1.41 MB	-rwxr-xr-x
zsoelim	42.55 KB	-rwxr-xr-x

Code Editor : wsrep_sst_common

# Copyright (C) 2017-2024 MariaDB
# Copyright (C) 2012-2015 Codership Oy
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING. If not, write to the
# Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston
# MA  02110-1335  USA.

# This is a common command line parser and common functions to
# be sourced by other SST scripts.

trap 'exit 32' HUP PIPE
trap 'exit 3'  INT QUIT TERM

OS="$(uname)"

# Setting the paths for some utilities on CentOS
export PATH="${PATH:+$PATH:}/usr/local/bin:/usr/local/sbin:/bin:/sbin:/usr/bin:/usr/sbin"
if [ "$OS" != 'Darwin' ]; then
    export LD_LIBRARY_PATH="${LD_LIBRARY_PATH:+$LD_LIBRARY_PATH:}/usr/local/lib:/lib:/usr/lib:/opt/lib"
fi

safe()
{
  if [[ "${!1}" = *[\ \'\`\$]* ]]; then
    wsrep_log_error "Invalid value for $1: ${!1}"
    exit 21
  fi
  echo "${!1}"
}

commandex()
{
    if [ -n "$BASH_VERSION" ]; then
        command -v "$1" || :
    elif [ -x "$1" ]; then
        echo "$1"
    else
        which "$1" || :
    fi
}

with_bash_42=0
with_printf=1
if [ -z "$BASH_VERSION" ]; then
    [ -z "$(commandex printf)" ] && with_printf=0
else
    [ "${BASH_VERSINFO[0]}" -eq 4 -a "${BASH_VERSINFO[1]}" -ge 2 -o \
      "${BASH_VERSINFO[0]}" -gt 4 ] && with_bash_42=1
fi

wsrep_log()
{
    local t
    # echo everything to stderr so that it gets into common error log
    # deliberately made to look different from the rest of the log
    if [ "$OS" = 'Linux' ]; then
        t=$(date '+%Y%m%d %H:%M:%S.%3N')
    elif [ $with_bash_42 -ne 0 ]; then
        printf -v t '%(%Y%m%d %H:%M:%S)T.000'
    else
        t=$(date '+%Y%m%d %H:%M:%S.000')
    fi
    echo "WSREP_SST: $* ($t)" >&2
}

wsrep_log_error()
{
    wsrep_log "[ERROR] $*"
}

wsrep_log_warning()
{
    wsrep_log "[WARNING] $*"
}

wsrep_log_info()
{
    wsrep_log "[INFO] $*"
}

trim_string()
{
    if [ -n "$BASH_VERSION" ]; then
        local pattern="[![:space:]${2:-}]"
        local x="${1#*$pattern}"
        local z=${#1}
        x=${#x}
        if [ $x -ne $z ]; then
            local y="${1%$pattern*}"
            y=${#y}
            x=$(( z-x-1 ))
            y=$(( y-x+1 ))
            echo "${1:$x:$y}"
        else
            echo ''
        fi
    else
        local pattern="[[:space:]${2:-}]"
        echo "$1" | sed -E "s/^$pattern+|$pattern+\$//g"
    fi
}

trim_dir()
{
    if [ -n "$BASH_VERSION" ]; then
        local pattern="![:space:]${2:-}"
        local x="${1#*[$pattern]}"
        local z=${#1}
        x=${#x}
        if [ $x -ne $z ]; then
            local y="${1%[$pattern/]*}"
            y=${#y}
            x=$(( z-x-1 ))
            y=$(( y-x+1 ))
            x="${1:$x:$y}"
            [ -z "$x" ] && x='.'
            echo "$x"
        else
            echo ''
        fi
    else
        local pattern="[:space:]${2:-}"
        local x=$(echo "$1" | sed -E "s/^[$pattern]+|[$pattern/]+\$//g")
        if [ -n "$x" ]; then
            echo "$x"
        elif "${1#*/}" != "$1"; then
            echo '.'
        else
            echo ''
        fi
    fi
}

trim_right()
{
    if [ -n "$BASH_VERSION" ]; then
        local pattern="[![:space:]${2:-}]"
        local z=${#1}
        local y="${1%$pattern*}"
        y=${#y}
        if [ $y -ne $z ]; then
            y=$(( y+1 ))
            echo "${1:0:$y}"
        else
            echo ''
        fi
    else
        local pattern="[[:space:]${2:-}]"
        echo "$1" | sed -E "s/$pattern+\$//g"
    fi
}

trim_left()
{
    if [ -n "$BASH_VERSION" ]; then
        local pattern="[![:space:]${2:-}]"
        local x="${1#*$pattern}"
        local z=${#1}
        x=${#x}
        if [ $x -ne $z ]; then
            x=$(( z-x-1 ))
            echo "${1:$x:$z}"
        else
            echo ''
        fi
    else
        local pattern="[[:space:]${2:-}]"
        echo "$1" | sed -E "s/^$pattern+//g"
    fi
}

to_minuses()
{
    local x="$1"
    local t="${1#*_}"
    local r=""
    while [ "$t" != "$x" ]; do
       r="$r${x%%_*}-"
       x="$t"
       t="${t#*_}"
    done
    echo "$r$x"
}

WSREP_SST_OPT_BYPASS=0
WSREP_SST_OPT_PROGRESS=0
WSREP_SST_OPT_BINLOG=""
WSREP_SST_OPT_BINLOG_INDEX=""
WSREP_SST_OPT_LOG_BASENAME=""
WSREP_SST_OPT_DATA=""
WSREP_SST_OPT_AUTH="${WSREP_SST_OPT_AUTH:-}"
WSREP_SST_OPT_USER="${WSREP_SST_OPT_USER:-}"
WSREP_SST_OPT_PSWD="${WSREP_SST_OPT_PSWD:-}"
WSREP_SST_OPT_DEFAULT=""
WSREP_SST_OPT_DEFAULTS=""
WSREP_SST_OPT_EXTRA_DEFAULT=""
WSREP_SST_OPT_EXTRA_DEFAULTS=""
WSREP_SST_OPT_SUFFIX_DEFAULT=""
WSREP_SST_OPT_SUFFIX_VALUE=""
WSREP_SST_OPT_MYSQLD=""
WSREP_SST_OPT_PORT=""
WSREP_SST_OPT_ADDR=""
WSREP_SST_OPT_ADDR_PORT=""
WSREP_SST_OPT_HOST=""
WSREP_SST_OPT_HOST_UNESCAPED=""
ARIA_LOG_DIR=""
INNODB_DATA_HOME_DIR=$(trim_dir "${INNODB_DATA_HOME_DIR:-}")
INNODB_LOG_GROUP_HOME=$(trim_dir "${INNODB_LOG_GROUP_HOME:-}")
INNODB_UNDO_DIR=$(trim_dir "${INNODB_UNDO_DIR:-}")
INNODB_BUFFER_POOL=""
INNODB_BUFFER_POOL_SIZE=""
INNODB_FORCE_RECOVERY=""
INNOEXTRA=""

while [ $# -gt 0 ]; do
case "$1" in
    '--address')
        WSREP_SST_OPT_ADDR=$(trim_string "$2")
        #
        # Break address string into host:port/path parts
        #
        case "$WSREP_SST_OPT_ADDR" in
        \[*)
            # IPv6
            # Remove the starting and ending square brackets, if present:
            addr="${WSREP_SST_OPT_ADDR#\[}"
            addr=$(trim_right "${addr%%\]*}")
            # Some utilities and subsequent code require an address
            # without square brackets:
            readonly WSREP_SST_OPT_HOST_UNESCAPED="$addr"
            # Square brackets are needed in most cases:
            readonly WSREP_SST_OPT_HOST="[$addr]"
            # Mark this address as IPv6:
            readonly WSREP_SST_OPT_HOST_IPv6=1
            # Let's remove the leading part that contains the host address:
            remain="${WSREP_SST_OPT_ADDR#*\]}"
            ;;
        *)
            addr=$(trim_right "${WSREP_SST_OPT_ADDR%%[:/]*}")
            readonly WSREP_SST_OPT_HOST="$addr"
            readonly WSREP_SST_OPT_HOST_UNESCAPED="$addr"
            readonly WSREP_SST_OPT_HOST_IPv6=0
            # Let's remove the leading part that contains the host address:
            remain="${WSREP_SST_OPT_ADDR#*[:/]}"
            ;;
        esac
        # If there is nothing but the address, then the remainder is empty:
        [ "$remain" = "$WSREP_SST_OPT_ADDR" ] && remain=""
        # Let's remove the ":" character that separates the port number
        # from the hostname:
        remain="${remain#:}"
        # Extract the port number from the address - all characters
        # up to "/" (if present):
        WSREP_SST_OPT_ADDR_PORT="${remain%%/*}"
        # If the "/" character is present, then the path is not empty:
        if [ "$WSREP_SST_OPT_ADDR_PORT" != "$remain" ]; then
            # This operation removes everything up to the "/" character,
            # effectively removing the port number from the string:
            readonly WSREP_SST_OPT_PATH="${remain#*/}"
        else
            readonly WSREP_SST_OPT_PATH=""
        fi
        WSREP_SST_OPT_ADDR_PORT=$(trim_right "$WSREP_SST_OPT_ADDR_PORT")
        # Remove the module name part from the string, which ends with "/":
        remain="${WSREP_SST_OPT_PATH#*/}"
        # This operation removes the tail after the very first occurrence
        # of the "/" character, inclusively:
        readonly WSREP_SST_OPT_MODULE=$(trim_right "${WSREP_SST_OPT_PATH%%/*}")
        # If there is one more "/" in the string, then everything before
        # it will be the LSN, otherwise the LSN is empty:
        if [ "$remain" != "$WSREP_SST_OPT_PATH" ]; then
            # Extract the part that matches the LSN by removing all
            # characters starting from the very first "/":
            readonly WSREP_SST_OPT_LSN=$(trim_right "${remain%%/*}")
            # Exctract everything after the first occurrence of
            # the "/" character in the string:
            source="$remain"
            remain="${remain#*/}"
            # If the remainder does not match the original string,
            # then there is something else (the version number in
            # our case):
            if [ "$remain" != "$source" ]; then
                # Let's extract the version number by removing the tail
                # after the very first occurence of the "/" character
                # (inclusively):
                readonly WSREP_SST_OPT_SST_VER=$(trim_right "${remain%%/*}")
            else
                readonly WSREP_SST_OPT_SST_VER=""
            fi
        else
            readonly WSREP_SST_OPT_LSN=""
            readonly WSREP_SST_OPT_SST_VER=""
        fi
        shift
        ;;
    '--bypass')
        readonly WSREP_SST_OPT_BYPASS=1
        ;;
    '--progress')
        readonly WSREP_SST_OPT_PROGRESS=$(( $2 ))
        shift
        ;;
    '--datadir')
        # Let's remove the trailing slash:
        readonly WSREP_SST_OPT_DATA=$(trim_dir "$2")
        shift
        ;;
    '--aria-log-dir-path')
        # Let's remove the trailing slash:
        readonly ARIA_LOG_DIR=$(trim_dir "$2")
        shift
        ;;
    '--innodb-data-home-dir')
        # Let's remove the trailing slash:
        readonly INNODB_DATA_HOME_DIR=$(trim_dir "$2")
        shift
        ;;
    '--innodb-log-group-home-dir')
        # Let's remove the trailing slash:
        readonly INNODB_LOG_GROUP_HOME=$(trim_dir "$2")
        shift
        ;;
    '--innodb-undo-directory')
        # Let's remove the trailing slash:
        readonly INNODB_UNDO_DIR=$(trim_dir "$2")
        shift
        ;;
    '--innodb-buffer-pool-filename')
        readonly INNODB_BUFFER_POOL=$(trim_string "$2")
        shift
        ;;
    '--innodb-buffer-pool-size')
        readonly INNODB_BUFFER_POOL_SIZE=$(trim_string "$2")
        shift
        ;;
    '--defaults-file')
        file=$(trim_string "$2")
        readonly WSREP_SST_OPT_DEFAULT="$1=$file"
        readonly WSREP_SST_OPT_DEFAULTS="$1='$file'"
        shift
        ;;
    '--defaults-extra-file')
        file=$(trim_string "$2")
        readonly WSREP_SST_OPT_EXTRA_DEFAULT="$1=$file"
        readonly WSREP_SST_OPT_EXTRA_DEFAULTS="$1='$file'"
        shift
        ;;
    '--defaults-group-suffix')
        suffix=$(trim_string "$2")
        readonly WSREP_SST_OPT_SUFFIX_DEFAULT="$1=$suffix"
        readonly WSREP_SST_OPT_SUFFIX_VALUE="$suffix"
        shift
        ;;
    '--host')
        addr=$(trim_string "$2")
        case "$addr" in
        \[*)
            # IPv6
            # Remove the starting and ending square brackets, if present:
            addr="${addr#\[}"
            addr=$(trim_right "${addr%%\]*}")
            # Some utilities and subsequent code require an address
            # without square brackets:
            readonly WSREP_SST_OPT_HOST_UNESCAPED="$addr"
            # Square brackets are needed in most cases:
            readonly WSREP_SST_OPT_HOST="[$addr]"
            # Mark this address as IPv6:
            readonly WSREP_SST_OPT_HOST_IPv6=1
            ;;
        *)
            readonly WSREP_SST_OPT_HOST="$addr"
            readonly WSREP_SST_OPT_HOST_UNESCAPED="$addr"
            readonly WSREP_SST_OPT_HOST_IPv6=0
            ;;
        esac
        WSREP_SST_OPT_ADDR="$addr"
        shift
        ;;
    '--local-port')
        readonly WSREP_SST_OPT_LPORT=$(( $2 ))
        shift
        ;;
    '--parent')
        readonly WSREP_SST_OPT_PARENT=$(( $2 ))
        shift
        ;;
    '--password')
        WSREP_SST_OPT_PSWD="$2"
        shift
        ;;
    '--port')
        readonly WSREP_SST_OPT_PORT=$(( $2 ))
        shift
        ;;
    '--role')
        readonly WSREP_SST_OPT_ROLE=$(trim_string "$2")
        shift
        ;;
    '--socket')
        readonly WSREP_SST_OPT_SOCKET=$(trim_string "$2")
        shift
        ;;
    '--user')
        WSREP_SST_OPT_USER="$2"
        shift
        ;;
    '--gtid')
        readonly WSREP_SST_OPT_GTID=$(trim_string "$2")
        shift
        ;;
    '--binlog'|'--log-bin')
        readonly WSREP_SST_OPT_BINLOG=$(trim_string "$2")
        shift
        ;;
    '--binlog-index'|'--log-bin-index')
        WSREP_SST_OPT_BINLOG_INDEX=$(trim_string "$2")
        shift
        ;;
    '--log-basename')
        readonly WSREP_SST_OPT_LOG_BASENAME=$(trim_string "$2")
        shift
        ;;
    '--gtid-domain-id')
        readonly WSREP_SST_OPT_GTID_DOMAIN_ID=$(trim_string "$2")
        shift
        ;;
    '--mysqld-args')
        original_cmd=""
        shift
        cmd_tail=0
        while [ $# -gt 0 ]; do
           lname="${1#--}"
           # "--" is interpreted as the end of the list of options:
           if [ -z "$lname" ]; then
               shift
               if [ $# -gt 0 ]; then
                   # copy "--" to the output string:
                   original_cmd="$original_cmd --"
                   # All other arguments must be copied unchanged:
                   while [ $# -gt 0 ]; do
                       original_cmd="$original_cmd '$1'"
                       shift
                   done
               fi
               break
           fi
           # Make sure the argument does not start with "--", otherwise it
           # is a long option, which is processed after this "if":
           if [ "$lname" = "$1" ]; then
               # Check if the argument is the short option or the short
               # options list, starting with "-":
               options="${1#-}"
               if [ "$options" != "$1" -a -n "$options" ]; then
                   slist=""
                   while [ -n "$options" ]; do
                       # Let's separate the first character as the current
                       # option name:
                       if [ -n "$BASH_VERSION" ]; then
                           option="${options:0:1}"
                       elif [ $with_printf -ne 0 ]; then
                           option=$(printf '%.1s' "$options")
                       else
                           # If it's not bash and without printf,
                           # then we need to use slow external utilities:
                           option=$(echo "$options" | cut -c1)
                       fi
                       # And the subsequent characters consider option value:
                       value=""
                       if [ ${#options} -gt 0 ]; then
                           value="${options#?}"
                       fi
                       # Check for options without argument:
                       if [ "$option" != '?' -a \
                            "$option" != 'a' -a \
                            "$option" != 's' -a \
                            "$option" != 'v' ]
                       then
                           # If the option value is absent, then check
                           # the following argument:
                           if [ -z "$value" -a $# -gt 1 ]; then
                               # if the next argument does not start with
                               # the "-" character, then next argument is
                               # the current option value:
                               if [ "${2#-}" = "$2" ]; then
                                   shift
                                   value="$1"
                               elif [ "$2" = '--' ]; then
                                   shift
                                   if [ $# -gt 1 ]; then
                                       cmd_tail=1
                                       shift
                                       value="$1"
                                   fi
                               fi
                           fi
                           if [ "$option" = 'h' ]; then
                               if [ -z "$WSREP_SST_OPT_DATA" ]; then
                                   MYSQLD_OPT_DATADIR=$(trim_dir "$value")
                               fi
                           elif [ "$option" != 'u' -a \
                                  "$option" != 'P' ]
                           then
                               if [ $cmd_tail -ne 0 ]; then
                                   option="$option --"
                               fi
                               if [ -z "$value" ]; then
                                   slist="$slist$option"
                               elif [ -z "$slist" ]; then
                                   slist="$option '$value'"
                               else
                                   slist="$slist -$option '$value'"
                               fi
                               break
                           fi
                           if [ $cmd_tail -ne 0 ]; then
                               if [ -n "$slist" ]; then
                                   slist="$slist --"
                               else
                                   slist='-'
                               fi
                           fi
                           break
                       else
                           slist="$slist$option"
                       fi
                       options="$value"
                   done
                   if [ -n "$slist" ]; then
                       original_cmd="$original_cmd -$slist"
                   fi
               elif [ -z "$options" ]; then
                   # We found an minus sign without any characters after it:
                   original_cmd="$original_cmd -"
               else
                   # We found a value that does not start with a minus -
                   # it is a positional argument or the value of previous
                   # option. Copy it to output string (as is):
                   original_cmd="$original_cmd '$1'"
               fi
               shift
               if [ $cmd_tail -ne 0 ]; then
                   # All other arguments must be copied unchanged:
                   while [ $# -gt 0 ]; do
                       original_cmd="$original_cmd '$1'"
                       shift
                   done
                   break
               fi
               continue
           fi
           # Now we are sure that we are working with an option
           # that has a "long" name, so remove all characters after
           # the first equal sign:
           option="${1%%=*}"
           # If the option name contains underscores, then replace
           # them to minuses:
           if [ "${option#*_}" != "$option" ]; then
               option=$(to_minuses "$option")
           fi
           # The "--loose-" prefix should not affect the recognition
           # of the option name:
           if [ "${option#--loose-}" != "$option" ]; then
               option="--${option#--loose-}"
           fi
           # Some options just need to be removed from the list:
           if [ "$option" != '--defaults-file' -a \
                "$option" != '--defaults-extra-file' -a \
                "$option" != '--defaults-group-suffix' -a \
                "$option" != '--user' -a \
                "$option" != '--port' -a \
                "$option" != '--socket' ]; then
               value="${1#*=}"
               if [ "$value" = "$1" ]; then
                   value=""
               fi
               # Let's fill in the variables containing important paths
               # that might not have been passed through explicit parameters
               # (+ removing the trailing slash in these paths). Many of these
               # options are processed internally within scripts or passed
               # explicitly to other programs, so we need to remove them
               # from mysqld's argument list:
               skip_mysqld_arg=0
               case "$option" in
                   '--aria-log-dir-path')
                       if [ -z "$ARIA_LOG_DIR" ]; then
                           MYSQLD_OPT_ARIA_LOG_DIR=$(trim_dir "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--innodb-data-home-dir')
                       if [ -z "$INNODB_DATA_HOME_DIR" ]; then
                           MYSQLD_OPT_INNODB_DATA_HOME_DIR=$(trim_dir "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--innodb-log-group-home-dir')
                       if [ -z "$INNODB_LOG_GROUP_HOME" ]; then
                           MYSQLD_OPT_INNODB_LOG_GROUP_HOME=$(trim_dir "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--innodb-undo-directory')
                       if [ -z "$INNODB_UNDO_DIR" ]; then
                           MYSQLD_OPT_INNODB_UNDO_DIR=$(trim_dir "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--innodb-buffer-pool-filename')
                       if [ -z "$INNODB_BUFFER_POOL" ]; then
                           MYSQLD_OPT_INNODB_BUFFER_POOL=$(trim_string "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--innodb-buffer-pool-size')
                       if [ -z "$INNODB_BUFFER_POOL_SIZE" ]; then
                           MYSQLD_OPT_INNODB_BUFFER_POOL_SIZE=$(trim_string "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--innodb-force-recovery')
                       if [ -n "$value" -a "$value" != "0" ]; then
                           INNODB_FORCE_RECOVERY=$(trim_string "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--log-bin')
                       if [ -z "$WSREP_SST_OPT_BINLOG" ]; then
                           MYSQLD_OPT_LOG_BIN=$(trim_string "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--log-bin-index')
                       if [ -z "$WSREP_SST_OPT_BINLOG_INDEX" ]; then
                           MYSQLD_OPT_LOG_BIN_INDEX=$(trim_string "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--log-basename')
                       if [ -z "$WSREP_SST_OPT_LOG_BASENAME" ]; then
                           MYSQLD_OPT_LOG_BASENAME=$(trim_string "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--datadir')
                       if [ -z "$WSREP_SST_OPT_DATA" ]; then
                           MYSQLD_OPT_DATADIR=$(trim_dir "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
               esac
               if [ $skip_mysqld_arg -eq 0 ]; then
                   original_cmd="$original_cmd '$1'"
               fi
           fi
           shift
        done
        WSREP_SST_OPT_MYSQLD="${original_cmd# *}"
        break
        ;;
    *) # Must be command usage
        # exit 1
        ;;
esac
shift
done

WSREP_TRANSFER_TYPE='SST'
[ $WSREP_SST_OPT_BYPASS -ne 0 ] && readonly WSREP_TRANSFER_TYPE='IST'
# Let's take the name of the current script as a base,
# removing the directory, extension and "wsrep_sst_" prefix:
WSREP_METHOD="${0##*/}"
WSREP_METHOD="${WSREP_METHOD%.*}"
readonly WSREP_METHOD="${WSREP_METHOD#wsrep_sst_}"
if [ -n "${WSREP_SST_OPT_ROLE+x}" ]; then
    if [ "$WSREP_SST_OPT_ROLE" != 'donor' -a \
         "$WSREP_SST_OPT_ROLE" != 'joiner' ]
    then
        wsrep_log_error "Unrecognized role: '$WSREP_SST_OPT_ROLE'"
        exit 22 # EINVAL
    fi
else
    readonly WSREP_SST_OPT_ROLE='donor'
fi

readonly WSREP_SST_OPT_PROGRESS

# The same argument can be present on the command line several
# times, in this case we must take its last value:
if [ -n "${MYSQLD_OPT_ARIA_LOG_DIR:-}" -a \
     -z "$ARIA_LOG_DIR" ]; then
    readonly ARIA_LOG_DIR="$MYSQLD_OPT_ARIA_LOG_DIR"
fi
if [ -n "${MYSQLD_OPT_INNODB_DATA_HOME_DIR:-}" -a \
     -z "$INNODB_DATA_HOME_DIR" ]; then
    readonly INNODB_DATA_HOME_DIR="$MYSQLD_OPT_INNODB_DATA_HOME_DIR"
fi
if [ -n "${MYSQLD_OPT_INNODB_LOG_GROUP_HOME:-}" -a \
     -z "$INNODB_LOG_GROUP_HOME" ]; then
    readonly INNODB_LOG_GROUP_HOME="$MYSQLD_OPT_INNODB_LOG_GROUP_HOME"
fi
if [ -n "${MYSQLD_OPT_INNODB_UNDO_DIR:-}" -a \
     -z "$INNODB_UNDO_DIR" ]; then
    readonly INNODB_UNDO_DIR="$MYSQLD_OPT_INNODB_UNDO_DIR"
fi
if [ -n "${MYSQLD_OPT_INNODB_BUFFER_POOL:-}" -a \
     -z "$INNODB_BUFFER_POOL" ]; then
    readonly INNODB_BUFFER_POOL="$MYSQLD_OPT_INNODB_BUFFER_POOL"
fi
if [ -n "${MYSQLD_OPT_INNODB_BUFFER_POOL_SIZE:-}" -a \
     -z "$INNODB_BUFFER_POOL_SIZE" ]; then
    readonly INNODB_BUFFER_POOL_SIZE="$MYSQLD_OPT_INNODB_BUFFER_POOL_SIZE"
fi
if [ -n "${MYSQLD_OPT_LOG_BIN:-}" -a \
     -z "$WSREP_SST_OPT_BINLOG" ]; then
    readonly WSREP_SST_OPT_BINLOG="$MYSQLD_OPT_LOG_BIN"
fi
if [ -n "${MYSQLD_OPT_LOG_BIN_INDEX:-}" -a \
     -z "$WSREP_SST_OPT_BINLOG_INDEX" ]; then
    WSREP_SST_OPT_BINLOG_INDEX="$MYSQLD_OPT_LOG_BIN_INDEX"
fi
if [ -n "${MYSQLD_OPT_DATADIR:-}" -a \
     -z "$WSREP_SST_OPT_DATA" ]; then
    readonly WSREP_SST_OPT_DATA="$MYSQLD_OPT_DATADIR"
fi
if [ -n "${MYSQLD_OPT_LOG_BASENAME:-}" -a \
     -z "$WSREP_SST_OPT_LOG_BASENAME" ]; then
    readonly WSREP_SST_OPT_LOG_BASENAME="$MYSQLD_OPT_LOG_BASENAME"
fi

# If the --log-bin option is present without a value, then
# set WSREP_SST_OPT_BINLOG value using other arguments:
if [ -z "$WSREP_SST_OPT_BINLOG" -a -n "${MYSQLD_OPT_LOG_BIN+x}" ]; then
    if [ -n "$WSREP_SST_OPT_LOG_BASENAME" ]; then
        # If the WSREP_SST_OPT_BINLOG variable is not set, but
        # --log-basename is present among the arguments to mysqld,
        # then set WSREP_SST_OPT_BINLOG equal to the base name
        # with the "-bin" suffix:
        readonly WSREP_SST_OPT_BINLOG="$WSREP_SST_OPT_LOG_BASENAME-bin"
    else
        # Take the default name:
        readonly WSREP_SST_OPT_BINLOG='mysql-bin'
    fi
fi

# Reconstructing the command line arguments that control the innodb
# and binlog options:
if [ -n "$WSREP_SST_OPT_LOG_BASENAME" ]; then
    if [ -n "$WSREP_SST_OPT_MYSQLD" ]; then
        WSREP_SST_OPT_MYSQLD="--log-basename='$WSREP_SST_OPT_LOG_BASENAME' $WSREP_SST_OPT_MYSQLD"
    else
        WSREP_SST_OPT_MYSQLD="--log-basename='$WSREP_SST_OPT_LOG_BASENAME'"
    fi
fi
if [ -n "$ARIA_LOG_DIR" ]; then
    INNOEXTRA="$INNOEXTRA --aria-log-dir-path='$ARIA_LOG_DIR'"
fi
if [ -n "$INNODB_DATA_HOME_DIR" ]; then
    INNOEXTRA="$INNOEXTRA --innodb-data-home-dir='$INNODB_DATA_HOME_DIR'"
fi
if [ -n "$INNODB_LOG_GROUP_HOME" ]; then
    INNOEXTRA="$INNOEXTRA --innodb-log-group-home-dir='$INNODB_LOG_GROUP_HOME'"
fi
if [ -n "$INNODB_UNDO_DIR" ]; then
    INNOEXTRA="$INNOEXTRA --innodb-undo-directory='$INNODB_UNDO_DIR'"
fi
if [ -n "$INNODB_BUFFER_POOL" ]; then
    INNOEXTRA="$INNOEXTRA --innodb-buffer-pool-filename='$INNODB_BUFFER_POOL'"
fi
if [ -n "$INNODB_BUFFER_POOL_SIZE" ]; then
    INNOEXTRA="$INNOEXTRA --innodb-buffer-pool-size='$INNODB_BUFFER_POOL_SIZE'"
fi
if [ -n "$WSREP_SST_OPT_BINLOG" ]; then
    INNOEXTRA="$INNOEXTRA --log-bin='$WSREP_SST_OPT_BINLOG'"
    if [ -n "$WSREP_SST_OPT_BINLOG_INDEX" ]; then
        if [ -n "$WSREP_SST_OPT_MYSQLD" ]; then
            WSREP_SST_OPT_MYSQLD="--log-bin-index='$WSREP_SST_OPT_BINLOG_INDEX' $WSREP_SST_OPT_MYSQLD"
        else
            WSREP_SST_OPT_MYSQLD="--log-bin-index='$WSREP_SST_OPT_BINLOG_INDEX'"
        fi
    fi
fi

readonly INNODB_FORCE_RECOVERY
readonly WSREP_SST_OPT_MYSQLD

get_binlog()
{
    # if no command line argument and WSREP_SST_OPT_BINLOG is not set,
    # try to get it from my.cnf:
    if [ -z "$WSREP_SST_OPT_BINLOG" ]; then
        WSREP_SST_OPT_BINLOG=$(parse_cnf '--mysqld' 'log-bin')
    fi
    # if no command line argument and WSREP_SST_OPT_BINLOG_INDEX is not set,
    # try to get it from my.cnf:
    if [ -z "$WSREP_SST_OPT_BINLOG_INDEX" ]; then
        WSREP_SST_OPT_BINLOG_INDEX=$(parse_cnf '--mysqld' 'log-bin-index')
    fi
    # if no command line argument and WSREP_SST_OPT_LOG_BASENAME is not set,
    # then try to get it from my.cnf:
    if [ -z "$WSREP_SST_OPT_LOG_BASENAME" ]; then
        WSREP_SST_OPT_LOG_BASENAME=$(parse_cnf '--mysqld' 'log-basename')
    fi
    if [ -z "$WSREP_SST_OPT_BINLOG" ]; then
        # If the log-bin option is specified without a parameter,
        # then we need to build the name of the index file according
        # to the rules described in the server documentation:
        if [ $(in_config '--mysqld' 'log-bin') -ne 0 ]; then
            if [ -n "$WSREP_SST_OPT_LOG_BASENAME" ]; then
                # If the WSREP_SST_OPT_BINLOG variable is not set, but
                # --log-basename is present among the arguments of mysqld,
                # then set WSREP_SST_OPT_BINLOG equal to the base name
                # with the "-bin" suffix:
                readonly WSREP_SST_OPT_BINLOG="$WSREP_SST_OPT_LOG_BASENAME-bin"
            else
                # Take the default name:
                readonly WSREP_SST_OPT_BINLOG='mysql-bin'
            fi
        fi
    fi
    if [ -n "$WSREP_SST_OPT_BINLOG" ]; then
        # If the name of the index file is not specified, then we will build
        # it according to the specifications for the server:
        if [ -z "$WSREP_SST_OPT_BINLOG_INDEX" ]; then
            if [ -n "$WSREP_SST_OPT_LOG_BASENAME" ]; then
                # If the WSREP_SST_OPT_BINLOG_INDEX variable is not set, but
                # --log-basename is present among the arguments of mysqld,
                # then set WSREP_SST_OPT_BINLOG_INDEX equal to the base name
                # with the "-bin" suffix:
                readonly WSREP_SST_OPT_BINLOG_INDEX="$WSREP_SST_OPT_LOG_BASENAME-bin.index"
            else
                # Use the default name (note that base of this name
                # is already defined above):
                readonly WSREP_SST_OPT_BINLOG_INDEX="$WSREP_SST_OPT_BINLOG.index"
            fi
        else
            # Remove all directories from the index file path:
            local filename="${WSREP_SST_OPT_BINLOG_INDEX##*/}"
            # Check if the index file name contains the extension:
            if [ "${filename%.*}" = "$filename" ]; then
                # Let's add the default extension (".index"):
                readonly WSREP_SST_OPT_BINLOG_INDEX="$WSREP_SST_OPT_BINLOG_INDEX.index"
            else
                readonly WSREP_SST_OPT_BINLOG_INDEX
            fi
        fi
    fi
}

# Check the presence of the port value and, if necessary, transfer
# the port number from the address to the WSREP_SST_OPT_PORT variable
# or vice versa, and also, if necessary, substitute the missing port
# value into the address value:
if [ -n "$WSREP_SST_OPT_ADDR_PORT" ]; then
    if [ -n "$WSREP_SST_OPT_PORT" ]; then
        if [ "$WSREP_SST_OPT_PORT" != "$WSREP_SST_OPT_ADDR_PORT" ]; then
            echo "WSREP_SST: [ERROR] port in --port=$WSREP_SST_OPT_PORT" \
                 "differs from port in --address=$WSREP_SST_OPT_ADDR" >&2
            exit 2
        fi
    else
        # If the address contains a port number, assign it to
        # the corresponding variable:
        readonly WSREP_SST_OPT_PORT="$WSREP_SST_OPT_ADDR_PORT"
    fi
else
    # If the port is missing, take the default port:
    if [ -z "$WSREP_SST_OPT_PORT" ]; then
        readonly WSREP_SST_OPT_PORT=4444
    fi
    WSREP_SST_OPT_ADDR_PORT="$WSREP_SST_OPT_PORT"
fi

# Let's construct a new value for the address with the port:
sst_path="${WSREP_SST_OPT_PATH:+/}$WSREP_SST_OPT_PATH"
WSREP_SST_OPT_ADDR="$WSREP_SST_OPT_HOST:$WSREP_SST_OPT_PORT$sst_path"

readonly WSREP_SST_OPT_ADDR
readonly WSREP_SST_OPT_ADDR_PORT

# try to use my_print_defaults, mysql and mysqldump that come
# with the sources (for MTR suite):
script_binary=$(dirname "$0")
SCRIPTS_DIR=$(cd "$script_binary"; pwd)
EXTRA_DIR="$SCRIPTS_DIR/../extra"

if [ -x "$SCRIPTS_DIR/my_print_defaults" ]; then
    MY_PRINT_DEFAULTS="$SCRIPTS_DIR/my_print_defaults"
elif [ -x "$EXTRA_DIR/my_print_defaults" ]; then
    MY_PRINT_DEFAULTS="$EXTRA_DIR/my_print_defaults"
else
    MY_PRINT_DEFAULTS=$(commandex 'my_print_defaults')
    if [ -z "$MY_PRINT_DEFAULTS" ]; then
        wsrep_log_error "my_print_defaults not found in path"
        exit 2
    fi
fi

readonly MY_PRINT_DEFAULTS

wsrep_defaults="$WSREP_SST_OPT_DEFAULTS"
wsrep_defaults="$wsrep_defaults${WSREP_SST_OPT_EXTRA_DEFAULTS:+ }$WSREP_SST_OPT_EXTRA_DEFAULTS"
wsrep_defaults="$wsrep_defaults${WSREP_SST_OPT_SUFFIX_DEFAULT:+ }$WSREP_SST_OPT_SUFFIX_DEFAULT"

readonly WSREP_SST_OPT_CONF="${wsrep_defaults:+ }$wsrep_defaults"

wsrep_defaults="$WSREP_SST_OPT_DEFAULT"
wsrep_defaults="$wsrep_defaults${WSREP_SST_OPT_EXTRA_DEFAULT:+ }$WSREP_SST_OPT_EXTRA_DEFAULT"
wsrep_defaults="$wsrep_defaults${WSREP_SST_OPT_SUFFIX_DEFAULT:+ }$WSREP_SST_OPT_SUFFIX_DEFAULT"

readonly WSREP_SST_OPT_CONF_UNQUOTED="${wsrep_defaults:+ }$wsrep_defaults"

#
# User can specify mariabackup specific settings that will be used during sst
# process like encryption, etc. Parse such configuration option.
#
# 1st parameter: group (config file section like sst) or
#                my_print_defaults argument (like --mysqld)
# 2nd parameter: var : name of the variable in the section, e.g. server-id
# 3rd parameter: default value for the parameter
#
parse_cnf()
{
    local groups="$1"
    local var="$2"
    local reval=""

# normalize the variable names specified in the .cnf file
    # (user can use '_' or '-', for example, log-bin or log_bin),
    # then search for the last instance of the desired variable
    # and finally get the value of that variable (if the variable
    # was specified several times - we use only its last instance):

local pattern='BEGIN {OFS=FS="="} {sub(/^--loose/,"-",$0); gsub(/_/,"-",$1); if ($1=="--'"$var"'") lastval=substr($0,length($1)+2)} END {print lastval}'

while [ -n "$groups" ]; do
        # Remove the largest suffix starting with the '|' character:
        local group="${groups%%\|*}"
        # Remove the remainder (the group name) from the rest
        # of the groups list (as if it were a prefix):
        if [ "$group" != "$groups" ]; then
            groups="${groups#*\|}"
        else
            groups=""
        fi
        # If the group name is the same as the "mysqld" without "--" prefix,
        # then try to use it together with the group suffix:
        if [ "$group" = 'mysqld' -a -n "$WSREP_SST_OPT_SUFFIX_VALUE" ]; then
            reval=$("$MY_PRINT_DEFAULTS" \
                    ${WSREP_SST_OPT_DEFAULT:+"$WSREP_SST_OPT_DEFAULT"} \
                    ${WSREP_SST_OPT_EXTRA_DEFAULT:+"$WSREP_SST_OPT_EXTRA_DEFAULT"} \
                    ${WSREP_SST_OPT_SUFFIX_DEFAULT:+"$WSREP_SST_OPT_SUFFIX_DEFAULT"} \
                    "mysqld$WSREP_SST_OPT_SUFFIX_VALUE" | awk "$pattern")
            if [ -n "$reval" ]; then
                break
            fi
        fi
        # Let's try to use the group name as it is:
        reval=$("$MY_PRINT_DEFAULTS" \
                ${WSREP_SST_OPT_DEFAULT:+"$WSREP_SST_OPT_DEFAULT"} \
                ${WSREP_SST_OPT_EXTRA_DEFAULT:+"$WSREP_SST_OPT_EXTRA_DEFAULT"} \
                ${WSREP_SST_OPT_SUFFIX_DEFAULT:+"$WSREP_SST_OPT_SUFFIX_DEFAULT"} \
                "$group" | awk "$pattern")
        if [ -n "$reval" ]; then
            break
        fi
    done

# Use default if we haven't found a value:
    [ -z "$reval" ] && reval="${3:-}"

# Truncate spaces:
    [ -n "$reval" ] && reval=$(trim_string "$reval")

echo "$reval"
}

#
# This function simply checks for the presence of the parameter
# in the config file, but does not return its value. It returns "1"
# (true) even if the parameter is present in the configuration file
# without a value:
#
in_config()
{
    local groups="$1"
    local var="$2"
    local found=0

# normalize the variable names specified in the .cnf file
    # (user can use '_' or '-', for example, log-bin or log_bin),
    # then search for the last instance(s) of the desired variable:

local pattern='BEGIN {OFS=FS="="; found=0} {sub(/^--loose/,"-",$0); gsub(/_/,"-",$1); if ($1=="--'"$var"'") found=1} END {print found}'

while [ -n "$groups" ]; do
        # Remove the largest suffix starting with the '|' character:
        local group="${groups%%\|*}"
        # Remove the remainder (the group name) from the rest
        # of the groups list (as if it were a prefix):
        if [ "$group" != "$groups" ]; then
            groups="${groups#*\|}"
        else
            groups=""
        fi
        # If the group name is the same as the "mysqld" without "--" prefix,
        # then try to use it together with the group suffix:
        if [ "$group" = 'mysqld' -a -n "$WSREP_SST_OPT_SUFFIX_VALUE" ]; then
            found=$("$MY_PRINT_DEFAULTS" \
                    ${WSREP_SST_OPT_DEFAULT:+"$WSREP_SST_OPT_DEFAULT"} \
                    ${WSREP_SST_OPT_EXTRA_DEFAULT:+"$WSREP_SST_OPT_EXTRA_DEFAULT"} \
                    ${WSREP_SST_OPT_SUFFIX_DEFAULT:+"$WSREP_SST_OPT_SUFFIX_DEFAULT"} \
                    "mysqld$WSREP_SST_OPT_SUFFIX_VALUE" | awk "$pattern")
            if [ $found -ne 0 ]; then
                break
            fi
        fi
        # Let's try to use the group name as it is:
        found=$($MY_PRINT_DEFAULTS \
                ${WSREP_SST_OPT_DEFAULT:+"$WSREP_SST_OPT_DEFAULT"} \
                ${WSREP_SST_OPT_EXTRA_DEFAULT:+"$WSREP_SST_OPT_EXTRA_DEFAULT"} \
                ${WSREP_SST_OPT_SUFFIX_DEFAULT:+"$WSREP_SST_OPT_SUFFIX_DEFAULT"} \
                "$group" | awk "$pattern")
        if [ $found -ne 0 ]; then
            break
        fi
    done

echo $found
}

# Get rid of incorrect values resulting from substitution
# in programs external to the script:
if [ "$WSREP_SST_OPT_USER" = '(null)' ]; then
    WSREP_SST_OPT_USER=""
fi
if [ "$WSREP_SST_OPT_PSWD" = '(null)' ]; then
    WSREP_SST_OPT_PSWD=""
fi
if [ "$WSREP_SST_OPT_AUTH" = '(null)' ]; then
    WSREP_SST_OPT_AUTH=""
fi

# Let's read the value of the authentication string from the
# configuration file so that it does not go to the command line
# and does not appear in the ps output:
if [ -z "$WSREP_SST_OPT_AUTH" ]; then
    WSREP_SST_OPT_AUTH=$(parse_cnf 'sst' 'wsrep-sst-auth')
fi

# Splitting WSREP_SST_OPT_AUTH as "user:password" pair:
if [ -n "$WSREP_SST_OPT_AUTH" ]; then
    # Extract username as shortest prefix up to first ':' character:
    WSREP_SST_OPT_AUTH_USER="${WSREP_SST_OPT_AUTH%%:*}"
    if [ -z "$WSREP_SST_OPT_USER" ]; then
        # if the username is not in the command line arguments,
        # set the username and password using WSREP_SST_OPT_AUTH
        # from the environment:
        WSREP_SST_OPT_USER="$WSREP_SST_OPT_AUTH_USER"
        WSREP_SST_OPT_PSWD="${WSREP_SST_OPT_AUTH#*:}"
    elif [ "$WSREP_SST_OPT_USER" = "$WSREP_SST_OPT_AUTH_USER" ]; then
        # If the username in the command line arguments and in
        # the environment variable are the same, set the password
        # if it was not specified in the command line:
        if [ -z "$WSREP_SST_OPT_PSWD" ]; then
            WSREP_SST_OPT_PSWD="${WSREP_SST_OPT_AUTH#*:}"
        fi
    else
        # The username is passed through the command line and does
        # not match the username in the environment variable - ignore
        # the environment and rebuild the authentication parameters:
        WSREP_SST_OPT_AUTH="$WSREP_SST_OPT_USER:$WSREP_SST_OPT_PSWD"
    fi
fi

WSREP_SST_OPT_REMOTE_AUTH="${WSREP_SST_OPT_REMOTE_AUTH:-}"
WSREP_SST_OPT_REMOTE_USER=
WSREP_SST_OPT_REMOTE_PSWD=
if [ -n "$WSREP_SST_OPT_REMOTE_AUTH" ]; then
    # Split auth string at the last ':'
    WSREP_SST_OPT_REMOTE_USER="${WSREP_SST_OPT_REMOTE_AUTH%%:*}"
    WSREP_SST_OPT_REMOTE_PSWD="${WSREP_SST_OPT_REMOTE_AUTH#*:}"
fi

readonly WSREP_SST_OPT_USER
readonly WSREP_SST_OPT_PSWD
readonly WSREP_SST_OPT_AUTH
readonly WSREP_SST_OPT_REMOTE_USER
readonly WSREP_SST_OPT_REMOTE_PSWD
readonly WSREP_SST_OPT_REMOTE_AUTH

if [ -n "$WSREP_SST_OPT_DATA" ]; then
    SST_PROGRESS_FILE="$WSREP_SST_OPT_DATA/sst_in_progress"
else
    SST_PROGRESS_FILE=""
fi

wsrep_cleanup_progress_file()
{
    if [ -n "$SST_PROGRESS_FILE" -a -f "$SST_PROGRESS_FILE" ]; then
        rm -f "$SST_PROGRESS_FILE" 2>/dev/null || :
    fi
}

wsrep_check_program()
{
    local prog="$1"
    local cmd=$(commandex "$prog")
    if [ -z "$cmd" ]; then
        wsrep_log_error "'$prog' not found in path"
        return 2 # no such file or directory
    fi
}

wsrep_check_programs()
{
    local ret=0
    while [ $# -gt 0 ]; do
        wsrep_check_program "$1" || ret=$?
        shift
    done
    return $ret
}

wsrep_check_datadir()
{
    if [ -z "$WSREP_SST_OPT_DATA" ]; then
        wsrep_log_error \
            "The '--datadir' parameter must be passed to the SST script"
        exit 2
    fi
}

get_openssl()
{
    # If the OPENSSL_BINARY variable is already defined, just return:
    if [ -n "${OPENSSL_BINARY+x}" ]; then
        return 0
    fi
    # Let's look for openssl:
    OPENSSL_BINARY=$(commandex 'openssl')
    if [ -z "$OPENSSL_BINARY" ]; then
        OPENSSL_BINARY='/usr/bin/openssl'
        if [ ! -x "$OPENSSL_BINARY" ]; then
            OPENSSL_BINARY=""
        fi
    fi
    readonly OPENSSL_BINARY
}

#
# Generate a string equivalent to 16 random bytes
#
wsrep_gen_secret()
{
    get_openssl
    if [ -n "$OPENSSL_BINARY" ]; then
        "$OPENSSL_BINARY" rand -hex 16
    elif [ -n "$BASH_VERSION" ]; then
        printf '%04x%04x%04x%04x%04x%04x%04x%04x' \
               $RANDOM $RANDOM $RANDOM $RANDOM \
               $RANDOM $RANDOM $RANDOM $RANDOM
    elif [ $with_printf -ne 0 -a -n "$(commandex cksum)" ]; then
        printf '%08x%08x%08x%08x' \
            $(head -8 /dev/urandom | cksum | cut -d ' ' -f1) \
            $(head -8 /dev/urandom | cksum | cut -d ' ' -f1) \
            $(head -8 /dev/urandom | cksum | cut -d ' ' -f1) \
            $(head -8 /dev/urandom | cksum | cut -d ' ' -f1)
    else
        wsrep_log_error "Unable to generate 16-byte secret"
        exit 22
    fi
}

#
# Checking if the address passed to us is local.
# If the second parameter is nonzero, then this function
# does not check for matches with local domain names:
#
is_local_ip()
{
    # Rapid recognition of the most common cases:
    [ "$1" = '127.0.0.1' -o \
      "$1" = '127.0.0.2' -o \
      "$1" = 'localhost' -o \
      "$1" = '::1' ] && return 0
    # If the address starts with "127." this is probably a local
    # address, but we need to clarify what follows this prefix:
    if [ "${1#127.}" != "$1" ]; then
        # All 127.0.0.0/8 addresses are local:
        if echo "$1" | grep -q -E '^127\.[0-9]+\.[0-9]+\.[0-9]+$'; then
            return 0
        fi
    fi
    # If the second parameter is nonzero, then we will skip
    # the domain name check:
    if [ "${2:-0}" -eq 0 ]; then
       # We consider all the names of a given host to be local addresses:
       [ "$1" = "$(hostname -s 2>/dev/null)" -o \
         "$1" = "$(hostname -f 2>/dev/null)" -o \
         "$1" = "$(hostname -d 2>/dev/null)" ] && return 0
    fi
    # If the address contains anything other than digits
    # and separators, it is not a local address:
    [ "${1#*[!0-9.]}" != "$1" ] && \
    [ "${1#*[!0-9A-Fa-f:\[\]]}" != "$1" ] && return 1
    # Now let's check if the given address is assigned to
    # one of the network cards:
    local ip_util=$(commandex 'ip')
    if [ -n "$ip_util" ]; then
        # ip address show ouput format is " inet[6] <address>/<mask>":
        "$ip_util" address show \
            | grep -o -E '^[[:space:]]*inet.?[[:space:]]+[^[:space:]]+/' \
            | grep -qw -F -- "$1/" && return 0
    else
        local ifconfig_util=$(commandex 'ifconfig')
        if [ -n "$ifconfig_util" ]; then
            # ifconfig output format is " inet[6] <address> ...":
            "$ifconfig_util" \
                | grep -o -E '^[[:space:]]*inet.?[[:space:]]+[^[:space:]]+' \
                | grep -qw -F -- "$1" && return 0
        fi
    fi
    return 1
}

check_sockets_utils()
{
    # The presence of any of these utilities is enough for us:
    lsof_available=0
    sockstat_available=0
    ss_available=0
    raw_socket_check=0

if [ -n "$(commandex selinuxenabled)" ] && selinuxenabled; then
        raw_socket_check=1
        wsrep_log_info "/proc/net/tcp{,6} is being used directly to avoid excessive selinux AVC notices"
        return 0
    fi

socket_utility="$(commandex ss)"
    if [ -n "$socket_utility" ]; then
        socket_uname='ss'
        ss_available=1
        ss_opts='-nlp'
        # Let's check that ss has an option to skip headers:
        if $socket_utility -h 2>&1 | grep -qw -F -- '-H'; then
            ss_available=2
            ss_opts="${ss_opts}H"
        fi
    else
        socket_utility="$(commandex sockstat)"
        if [ -n "$socket_utility" ]; then
            socket_uname='sockstat'
            sockstat_available=1
            sockstat_opts='-p'
            if [ "$OS" = 'FreeBSD' ]; then
                # sockstat in FreeBSD is different from other systems,
                # let's denote it with a different value:
                sockstat_available=2
                sockstat_opts='-46lq -P tcp -p'
            fi
        else
            socket_utility="$(commandex lsof)"
            if [ -n "$socket_utility" ]; then
                socket_uname='lsof'
                lsof_available=1
                lsof_opts='-Pnl'
                # Let's check that lsof has an option to bypass blocking:
                if $socket_utility -h 2>&1 | grep -qw -F -- '-b'; then
                    lsof_available=2
                    lsof_opts="$lsof_opts -b -w"
                else
                    lsof_opts="$lsof_opts -S 10"
                fi
            else
                wsrep_log_error "Neither lsof, nor sockstat, nor ss tool" \
                                "were found in the path. Make sure you have" \
                                "at least one of them installed."
                exit 2 # ENOENT
            fi
        fi
    fi
    wsrep_log_info "'$socket_uname' is selected as a socket" \
                   "information utility."
}

#
# Check if the port is in the "listen" state.
# The first parameter is the PID of the process that should
# listen on the port - if it is not known, you can specify
# an empty string or zero.
# The second parameter is the port number.
# The third parameter is a list of the names of utilities
# (via "|") that can listen on this port during the state
# transfer.
#
check_port()
{
    local pid="${1:-0}"
    local port="$2"
    local utils="$3"

[ $pid -le 0 ] && pid='[0-9]+'

local rc=2 # ENOENT

if [ $raw_socket_check -ne 0 ]; then
        for key in $(awk -v p="$port" 'BEGIN { hex_port = sprintf(":%04X", p) } $2 ~ hex_port && $4 == "0A" { print $10 }' /proc/net/tcp /proc/net/tcp6); do
            return 0
        done
    elif [ $ss_available -ne 0 ]; then
        $socket_utility $ss_opts -t "( sport = :$port )" 2>/dev/null | \
            grep -q -E "[[:space:]]users:[[:space:]]?\$.*\\(\"($utils)[^[:space:]]*\"[^)]*,pid=$pid(,[^)]*)?\$" && rc=0
    elif [ $sockstat_available -ne 0 ]; then
        if [ $sockstat_available -gt 1 ]; then
            # The sockstat command on FreeBSD does not return
            # the connection state without special option, but
            # it supports filtering by connection state:
            local out
            out=$($socket_utility $sockstat_opts "$port" 2>/dev/null) || rc=16 # EBUSY
            # On FreeBSD, the sockstat utility may exit without
            # any output due to locking issues in certain versions;
            # let's return a special exit code in such cases:
            if [ $rc -eq 16 -o -z "$out" ]; then
                return 16 # EBUSY
            fi
            echo "$out" | \
                grep -q -E "^[^[:space:]]+[[:space:]]+($utils)[^[:space:]]*[[:space:]]+$pid([[:space:]]|\$)" && rc=0
        else
            $socket_utility $sockstat_opts "$port" 2>/dev/null | \
                grep -q -E "^[^[:space:]]+[[:space:]]+($utils)[^[:space:]]*[[:space:]]+$pid([[:space:]].+)?[[:space:]]LISTEN([[:space:]]|\$)" && rc=0
        fi
    elif [ $lsof_available -ne 0 ]; then
        $socket_utility $lsof_opts -i ":$port" 2>/dev/null | \
            grep -q -E "^($utils)[^[:space:]]*[[:space:]]+$pid([[:space:]].+)?[[:space:]]\$LISTEN\$([[:space:]]|\$)" && rc=0
    else
        wsrep_log_error "Unknown sockets utility"
        exit 2 # ENOENT
    fi

return $rc
}

#
# If the ssl_dhparams variable is already set, uses that as a source
# of dh parameters for OpenSSL. Otherwise, looks for dhparams.pem in
# the datadir, and creates it there if it can't find the file.
#
check_for_dhparams()
{
    ssl_dhparams="$DATA/dhparams.pem"
    get_openssl
    if [ -n "$OPENSSL_BINARY" ]; then
        wsrep_log_info \
            "Could not find dhparams file, creating $ssl_dhparams"
        local bug=0
        local errmsg
        errmsg=$("$OPENSSL_BINARY" \
                 dhparam -out "$ssl_dhparams" -dsaparam 2048 2>&1) || bug=1
        if [ $bug -ne 0 ]; then
            wsrep_log_info "run: \"$OPENSSL_BINARY\" dhparam"\
                           "-out \"$ssl_dhparams\" -dsaparam 2048"
            wsrep_log_info "output: $errmsg"
            wsrep_log_error "******** ERROR *****************************************"
            wsrep_log_error "* Could not create the dhparams.pem file with OpenSSL. *"
            wsrep_log_error "********************************************************"
            ssl_dhparams=""
        fi
    else
        # Rollback: if openssl is not installed, then use
        # the default parameters:
        ssl_dhparams=""
    fi
}

#
# Verifies that the CA file verifies the certificate.
# Doing this here lets us generate better error messages.
#
# 1st param: path to the CA file.
# 2nd param: path to the certificate.
#
verify_ca_matches_cert()
{
    local cert="$1"
    local ca="$2"
    local cap="$3"

local readable=1; [ ! -r "$cert" ] && readable=0
         [ -n "$ca"  -a ! -r "$ca"   ] && readable=0
         [ -n "$cap" -a ! -r "$cap"  ] && readable=0

if [ $readable -eq 0 ]; then
        wsrep_log_error \
            "Both PEM file and CA file (or path) must be readable"
        exit 22
    fi

# If the openssl utility is not installed, then
    # we will not do this certificate check:
    get_openssl
    if [ -z "$OPENSSL_BINARY" ]; then
        wsrep_log_info "openssl utility not found"
        return
    fi

local not_match=0
    local errmsg
    errmsg=$("$OPENSSL_BINARY" verify -verbose \
                               ${ca:+ -CAfile} ${ca:+ "$ca"} \
                               ${cap:+ -CApath} ${cap:+ "$cap"} \
                               "$cert" 2>&1) || not_match=1

if [ $not_match -eq 1 ]; then
        wsrep_log_info "run: \"$OPENSSL_BINARY\" verify -verbose${ca:+ -CAfile \"$ca\"}${cap:+ -CApath \"$cap\"} \"$cert\""
        wsrep_log_info "output: $errmsg"
        wsrep_log_error "******** FATAL ERROR ********************************************"
        wsrep_log_error "* The certifcate and CA (certificate authority) do not match.   *"
        wsrep_log_error "* It does not appear that the certificate was issued by the CA. *"
        wsrep_log_error "* Please check your certificate and CA files.                   *"
        wsrep_log_error "*****************************************************************"
        exit 22
    fi
}

#
# Verifies that the certificate matches the private key.
# Doing this will save us having to wait for a timeout that would
# otherwise occur.
#
# 1st param: path to the certificate.
# 2nd param: path to the private key.
#
verify_cert_matches_key()
{
    local cert="$1"
    local key="$2"

if [ ! -r "$key" -o ! -r "$cert" ]; then
        wsrep_log_error "Both the certificate file and the key file" \
                        "must be readable"
        exit 22
    fi

# Generate the public key from the cert and the key.
    # They should match (otherwise we can't create an SSL connection).
    local pk1=$("$OPENSSL_BINARY" x509 -in "$cert" -pubkey -noout 2>/dev/null || :)
    local pk2=$("$OPENSSL_BINARY" pkey -in "$key" -pubout 2>/dev/null || :)
    if [ "$pk1" != "$pk2" ]; then
        wsrep_log_error "******************* FATAL ERROR *****************"
        wsrep_log_error "* The certificate and private key do not match. *"
        wsrep_log_error "* Please check your certificate and key files.  *"
        wsrep_log_error "*************************************************"
        exit 22
    fi
}

#
# Compares two version strings.
# The first parameter is the version to be checked;
# The second parameter is the minimum version required;
# Returns 1 (failure) if $1 >= $2, 0 (success) otherwise.
#
check_for_version()
{
    local y1="${1#*.}"
    [ "$y1" = "$1" ] && y1=""
    local z1="${y1#*.}"
    [ "$z1" = "$y1" ] && z1=""
    local w1="${z1#*.}"
    [ "$w1" = "$z1" ] && w1=""
    local x1="${1%%.*}"
    y1="${y1%%.*}"
    z1="${z1%%.*}"
    w1="${w1%%.*}"
    [ -z "$y1" ] && y1=0
    [ -z "$z1" ] && z1=0
    [ -z "$w1" ] && w1=0
    local y2="${2#*.}"
    [ "$y2" = "$2" ] && y2=""
    local z2="${y2#*.}"
    [ "$z2" = "$y2" ] && z2=""
    local w2="${z2#*.}"
    [ "$w2" = "$z2" ] && w2=""
    local x2="${2%%.*}"
    y2="${y2%%.*}"
    z2="${z2%%.*}"
    w2="${w2%%.*}"
    [ -z "$y2" ] && y2=0
    [ -z "$z2" ] && z2=0
    [ -z "$w2" ] && w2=0
    [ $x1 -lt $x2 ] && return 1
    [ $x1 -gt $x2 ] && return 0
    [ $y1 -lt $y2 ] && return 1
    [ $y1 -gt $y2 ] && return 0
    [ $z1 -lt $z2 ] && return 1
    [ $z1 -gt $z2 ] && return 0
    [ $w1 -lt $w2 ] && return 1
    return 0
}

#
# Check whether process is still running.
# The first parameter contains the name of the PID file.
# The second parameter is the flag of the need to delete
# the PID file.
# If the second parameter is not zero and not empty,
# then if the process terminates, the corresponding
# PID file will be deleted.
# This function also sets the CHECK_PID variable to zero
# if the process has already exited, or writes the PID
# of the process there if it is still running.
#
check_pid()
{
    local pid_file="$1"
    if [ -r "$pid_file" ]; then
        local pid=$(cat "$pid_file" 2>/dev/null || :)
        if [ -n "$pid" ]; then
            if [ $pid -gt 0 ]; then
                if ps -p $pid >/dev/null 2>&1; then
                    CHECK_PID=$pid
                    return 0
                fi
            fi
        fi
        local remove=${2:-0}
        if [ $remove -ne 0 ]; then
            rm -f "$pid_file" || :
        fi
    fi
    local config="${3:-}"
    if [ -n "$config" -a -f "$config" ]; then
        rm -f "$config" || :
    fi
    CHECK_PID=0
    return 1
}

#
# Checking that the process with the specified PID is still
# running and killing it in this case by sending SIGTERM
# (using the "kill" operation).
# The first parameter contains PID of the process.
# The second and third parameters (both optional) are the names
# of the PID and the configuration files, which should be removed
# after the process ends.
# If the first parameter (PID of the process) is zero, then
# the function immediately deletes the PID and the configuration
# files (if specified), without any additional checks.
#
cleanup_pid()
{
    local pid=$1
    local pid_file="${2:-}"
    local config="${3:-}"

if [ $pid -gt 0 ]; then
        if ps -p $pid >/dev/null 2>&1; then
            if kill $pid >/dev/null 2>&1; then
                sleep 0.5
                local round=0
                local force=0
                while ps -p $pid >/dev/null 2>&1; do
                    sleep 1
                    round=$(( round+1 ))
                    if [ $round -eq 16 ]; then
                        if [ $force -eq 0 ]; then
                            round=8
                            force=1
                            kill -9 $pid >/dev/null 2>&1 || :
                            sleep 0.5
                        else
                            return 1
                        fi
                    fi
                done
            elif ps -p $pid >/dev/null 2>&1; then
                wsrep_log_warning "Unable to kill PID=$pid${pid_file:+ ($pid_file)}"
                return 1
            fi
        fi
    fi

[ -n "$pid_file" -a -f "$pid_file" ] && rm -f "$pid_file" || :
    [ -n "$config" -a -f "$config" ] && rm -f "$config" || :

return 0
}

nproc=""

get_proc()
{
    if [ -z "$nproc" ]; then
        set +e
        if [ "$OS" = 'Linux' ]; then
            nproc=$(grep -cw -E '^processor' /proc/cpuinfo 2>/dev/null || :)
        elif [ "$OS" = 'Darwin' -o "$OS" = 'FreeBSD' ]; then
            nproc=$(sysctl -n hw.ncpu)
        fi
        set -e
        if [ -z "$nproc" ] || [ $nproc -eq 0 ]; then
            nproc=1
        fi
    fi
}

check_server_ssl_config()
{
    # backward-compatible behavior:
    tcert=$(parse_cnf 'sst' 'tca')
    tcap=$(parse_cnf 'sst' 'tcapath')
    tpem=$(parse_cnf 'sst' 'tcert')
    tkey=$(parse_cnf 'sst' 'tkey')
    # reading new ssl configuration options:
    local tcert2=$(parse_cnf "$encgroups" 'ssl-ca')
    local tcap2=$(parse_cnf "$encgroups" 'ssl-capath')
    local tpem2=$(parse_cnf "$encgroups" 'ssl-cert')
    local tkey2=$(parse_cnf "$encgroups" 'ssl-key')
    # if there are no old options, then we take new ones:
    if [ -z "$tcert" -a -z "$tcap" -a -z "$tpem" -a -z "$tkey" ]; then
        tcert="$tcert2"
        tcap="$tcap2"
        tpem="$tpem2"
        tkey="$tkey2"
    # checking for presence of the new-style SSL configuration:
    elif [ -n "$tcert2" -o -n "$tcap2" -o -n "$tpem2" -o -n "$tkey2" ]; then
        if [ "$tcert" != "$tcert2" -o \
             "$tcap"  != "$tcap2"  -o \
             "$tpem"  != "$tpem2"  -o \
             "$tkey"  != "$tkey2" ]
        then
            wsrep_log_info \
               "new ssl configuration options (ssl-ca[path], ssl-cert" \
               "and ssl-key) are ignored by SST due to presence" \
               "of the tca[path], tcert and/or tkey in the [sst] section"
        fi
    fi
    if [ -n "$tcert" ]; then
        if [ "${tcert%/}" != "$tcert" -o -d "$tcert" ]; then
            tcap="$tcert"
            tcert=""
        fi
    fi
}

# Get Common Name (CN) from the certificate:
openssl_getCN()
{
    get_openssl
    if [ -z "$OPENSSL_BINARY" ]; then
        wsrep_log_error \
            'openssl not found but it is required for authentication'
        exit 42
    fi

local bug=0
    local CN=$("$OPENSSL_BINARY" x509 -noout -subject -in "$1" 2>&1) || bug=1

if [ $bug -ne 0 ]; then
        wsrep_log_info "run: \"$OPENSSL_BINARY\" x509 -noout -subject -in \"$1\""
        wsrep_log_info "output: $CN"
        wsrep_log_error "******** FATAL ERROR **********************************************"
        wsrep_log_error "* Unable to parse the certificate file to obtain the common name. *"
        wsrep_log_error "*******************************************************************"
        exit 22
    fi

CN=$(trim_string "$CN")

if [ -n "$CN" ]; then
        # If the string begins with the "subject" prefix
        # then we need to remove it:
        local saved="$CN"
        local remain="${CN#subject}"
        if [ "$remain" != "$saved" ]; then
            remain=$(trim_left "$remain")
            # Now let's check for the presence of "=" character
            # after the "subject":
            saved="$remain"
            remain="${remain#=}"
            if [ "$remain" != "$saved" ]; then
                remain=$(trim_left "$remain")
            else
                remain=""
                bug=1
            fi
        fi
        while [ -n "$remain" ]; do
            local value=""
            # Let's extract the option name - all characters
            # up to the first '=' or ',' character (if present):
            local option="${remain%%[=,]*}"
            if [ "$option" != "$remain" ]; then
                option=$(trim_right "$option")
                # These variables will be needed to determine
                # which separator comes first:
                local x="${remain#*=}"
                local y="${remain#*,}"
                local z=${#remain}
                x=${#x}; [ $x -eq $z ] && x=0
                y=${#y}; [ $y -eq $z ] && y=0
                # The remaining string is everything that follows
                # the separator character:
                remain=$(trim_left "${remain#*[=,]}")
                # Let's check what we are dealing with - an equal
                # sign or a comma?
                if [ $x -gt $y ]; then
                    # If the remainder begins with a double quote,
                    # then there is a string containing commas and
                    # we need to parse it:
                    saved="$remain"
                    remain="${remain#\"}"
                    if [ "$remain" != "$saved" ]; then
                        while :; do
                            # We need to find the closing quote:
                            local prefix="$remain"
                            remain="${remain#*\"}"
                            # Let's check if there is a closing quote?
                            if [ "$remain" = "$prefix" ]; then
                                bug=1
                                break
                            fi
                            # Everything up to the closing quote is
                            # the next part of the value:
                            value="$value${prefix%%\"*}"
                            # But if the last character of the value
                            # is a backslash, then it is a quoted quotation
                            # mark and we need to add it to the value:
                            if [ "${value%\\}" != "$value" ]; then
                                value="$value\""
                            else
                                break
                            fi
                        done
                        [ $bug -ne 0 ] && break
                        # Now we have to remove "," if it is present
                        # in the string after the value:
                        saved=$(trim_left "$remain")
                        remain="${saved#,}"
                        if [ "$remain" != "$saved" ]; then
                            remain=$(trim_left "$remain")
                        elif [ -n "$remain" ]; then
                            bug=1
                            break
                        fi
                    else
                        # We are dealing with a simple unquoted string value,
                        # therefore we need to take everything up to the end
                        # of the string, or up to the next comma character:
                        value="${remain%%,*}"
                        if [ "$value" != "$remain" ]; then
                            remain=$(trim_left "${remain#*,}")
                        else
                            remain=""
                        fi
                        value=$(trim_right "$value")
                    fi
                    if [ "$option" = 'CN' -a -n "$value" ]; then
                        echo "$value"
                        return
                    fi
                fi
            else
                remain=""
            fi
        done
    fi

if [ $bug -ne 0 ]; then
        wsrep_log_error "******** FATAL ERROR **********************************************"
        wsrep_log_error "* Unable to parse the certificate options: '$CN'"
        wsrep_log_error "*******************************************************************"
        exit 22
    fi

echo ''
}

simple_cleanup()
{
    # Since this is invoked just after exit NNN
    local estatus=$?
    if [ $estatus -ne 0 ]; then
        wsrep_log_error "Cleanup after exit with status: $estatus"
    fi
    if [ -n "$SST_PID" ]; then
        [ "$(pwd)" != "$OLD_PWD" ] && cd "$OLD_PWD"
        [ -f "$SST_PID" ] && rm -f "$SST_PID" || :
    fi
    exit $estatus
}

create_data()
{
    OLD_PWD="$(pwd)"
    DATA_DIR="$OLD_PWD"

if [ -n "$DATA" -a "$DATA" != '.' ]; then
        [ ! -d "$DATA" ] && mkdir -p "$DATA"
        cd "$DATA"
        DATA_DIR="$(pwd)"
        cd "$OLD_PWD"
    fi
}

create_dirs()
{
    local simplify=${1:-0}

# if no command line argument and INNODB_DATA_HOME_DIR environment
    # variable is not set, try to get it from the my.cnf:
    if [ -z "$INNODB_DATA_HOME_DIR" ]; then
        INNODB_DATA_HOME_DIR=$(parse_cnf '--mysqld' 'innodb-data-home-dir')
        INNODB_DATA_HOME_DIR=$(trim_dir "$INNODB_DATA_HOME_DIR")
    fi

if [ -n "$INNODB_DATA_HOME_DIR" -a "$INNODB_DATA_HOME_DIR" != '.' -a \
         "$INNODB_DATA_HOME_DIR" != "$DATA_DIR" ]
    then
        # handle both relative and absolute paths:
        cd "$DATA"
        [ ! -d "$INNODB_DATA_HOME_DIR" ] && mkdir -p "$INNODB_DATA_HOME_DIR"
        cd "$INNODB_DATA_HOME_DIR"
        ib_home_dir="$(pwd)"
        cd "$OLD_PWD"
        [ $simplify -ne 0 -a "$ib_home_dir" = "$DATA_DIR" ] && ib_home_dir=""
    fi

# if no command line argument and INNODB_LOG_GROUP_HOME is not set,
    # then try to get it from the my.cnf:
    if [ -z "$INNODB_LOG_GROUP_HOME" ]; then
        INNODB_LOG_GROUP_HOME=$(parse_cnf '--mysqld' 'innodb-log-group-home-dir')
        INNODB_LOG_GROUP_HOME=$(trim_dir "$INNODB_LOG_GROUP_HOME")
    fi

if [ -n "$INNODB_LOG_GROUP_HOME" -a "$INNODB_LOG_GROUP_HOME" != '.' -a \
         "$INNODB_LOG_GROUP_HOME" != "$DATA_DIR" ]
    then
        # handle both relative and absolute paths:
        cd "$DATA"
        [ ! -d "$INNODB_LOG_GROUP_HOME" ] && mkdir -p "$INNODB_LOG_GROUP_HOME"
        cd "$INNODB_LOG_GROUP_HOME"
        ib_log_dir="$(pwd)"
        cd "$OLD_PWD"
        [ $simplify -ne 0 -a "$ib_log_dir" = "$DATA_DIR" ] && ib_log_dir=""
    fi

# if no command line argument and INNODB_UNDO_DIR is not set,
    # then try to get it from the my.cnf:
    if [ -z "$INNODB_UNDO_DIR" ]; then
        INNODB_UNDO_DIR=$(parse_cnf '--mysqld' 'innodb-undo-directory')
        INNODB_UNDO_DIR=$(trim_dir "$INNODB_UNDO_DIR")
    fi

if [ -n "$INNODB_UNDO_DIR" -a "$INNODB_UNDO_DIR" != '.' -a \
         "$INNODB_UNDO_DIR" != "$DATA_DIR" ]
    then
        # handle both relative and absolute paths:
        cd "$DATA"
        [ ! -d "$INNODB_UNDO_DIR" ] && mkdir -p "$INNODB_UNDO_DIR"
        cd "$INNODB_UNDO_DIR"
        ib_undo_dir="$(pwd)"
        cd "$OLD_PWD"
        [ $simplify -ne 0 -a "$ib_undo_dir" = "$DATA_DIR" ] && ib_undo_dir=""
    fi

# if no command line argument then try to get it from the my.cnf:
    if [ -z "$ARIA_LOG_DIR" ]; then
        ARIA_LOG_DIR=$(parse_cnf '--mysqld' 'aria-log-dir-path')
        ARIA_LOG_DIR=$(trim_dir "$ARIA_LOG_DIR")
    fi

if [ -n "$ARIA_LOG_DIR" -a "$ARIA_LOG_DIR" != '.' -a \
         "$ARIA_LOG_DIR" != "$DATA_DIR" ]
    then
        # handle both relative and absolute paths:
        cd "$DATA"
        [ ! -d "$ARIA_LOG_DIR" ] && mkdir -p "$ARIA_LOG_DIR"
        cd "$ARIA_LOG_DIR"
        ar_log_dir="$(pwd)"
        cd "$OLD_PWD"
        [ $simplify -ne 0 -a "$ar_log_dir" = "$DATA_DIR" ] && ar_log_dir=""
    fi

return 0
}

wait_previous_sst()
{
    # give some time for previous SST to complete:
    check_round=0
    while check_pid "$SST_PID" 1; do
        wsrep_log_info "Previous SST is not completed, waiting for it to exit"
        check_round=$(( check_round+1 ))
        if [ $check_round -eq 30 ]; then
            wsrep_log_error "previous SST script still running..."
            exit 114 # EALREADY
        fi
        sleep 1
    done

trap simple_cleanup EXIT
    echo $$ > "$SST_PID"
}

DATA="$WSREP_SST_OPT_DATA"

wsrep_check_datadir
create_data

SST_PID="$DATA/wsrep_sst.pid"

if [ -n "${MTR_SST_JOINER_DELAY:-}" ]; then
    MTR_SST_JOINER_DELAY=$(trim_string "$MTR_SST_JOINER_DELAY")
fi

simulate_long_sst()
{
    # Delay for MTR tests if needed to simulate long SST/IST:
    if [ ${MTR_SST_JOINER_DELAY:-0} -gt 0 ]; then
        wsrep_log_info "Sleeping $MTR_SST_JOINER_DELAY seconds for MTR test"
        sleep $MTR_SST_JOINER_DELAY
    fi
}

wsrep_log_info "$WSREP_METHOD $WSREP_TRANSFER_TYPE started on $WSREP_SST_OPT_ROLE"

${this.title}

Code Editor : wsrep_sst_common